Vin999
Active Member
Don't worry to much about your goo experiment on the rubber seal it aint going to do any harm.Evening people,
I've had the master resivoir off, cleaned the gromet seals, reseated them with a slight smear of red gasket goo. Also I've cleaned and installed the VS resivoir onto the master cylinder (finally), also with a slight smear of red gasket goo. Making sure it doesn't block any ports...
I'm leaving the gasket goo to go off, then I'll refill. I'll update in a night or so,
Cheers
Pete
Since you have taken reservoir of, chances you might have introduced some air into m/cylinder, so it will pay to bleed m/cylinder at the lines before you bleed the 4 wheels again.
With all the issues sorted once you bleed the whole system again you should be right this time. cheers