Search results

these are removalbe roof racks, so therefore they are meant to be removed by the owner.

yeah i always put the bottom up, its the only way to transport them. i board is lucky to weigh 10kg so i should be able to do like 150 now worries. the werid thing is that both of them come off not just the one and the board ws only held on by occy straps sp surely they arent that strong

hey all, i got a bit of a weird one, the other day while driving along the highway @ 100kph with a surfboard tied to the roof rakes with occy straps. all of a sudden the board is flying though the car and come smashing down on the road.( surfboard is now toast) the reason for this is that...

dealer will give me more then that with none of the extras....

ok thanks i might give that a go then c what ebay does, do u think im better off selling it almost stock and keep the extras for my new car?

15999 would be lower if acc.. arnt wanted.. is that to high?

so is there anyone ????

i have been on carsales, but the problem is i see a few on the higher then mine, but i dont know what they SELL for as those ones seem to have been there for awhile. i am very neg.. on the price, i will go with the market..

what do u think it should be $$$$$. and i forgot to note that the clutch has been replace with excedy HD with solid flywheel. was well worth the dollars....

ITEM: VY Holden Commodore Manual LOCATION: NSW, Grafton 2460 YEAR: 12/2002 SERIES: Example: VY BADGE: Example: S Pac ENGINE: V6 3.8L TRANSMISSION: % speed Manual COLOUR: Hothouse Green EXTERIOR CONDITION: Great and shiny smooth INTERIOR CONDITION: Mint leather retrim...

well i painted my; air-con ducts centre console rear of center console. ( around rear air-con ducts ) around speedo cluter and even went a little further and pulled my cluster apart and painted around the guages silver also. all can be removed easliy just do some searches on here and...

just go to super sheap auto. and get 1 can a wheel silver, at a max it is $15. i just had to make sure that u put it on in very thin coats allowing in to try fully in between coats so that it didnt run. works great, not the best of pictures buy you get the idea of the colour.

lloking at the shape of it any one ale to look up the inside far enough to get a look at the butterfly on the inside must be able to see around corners. its not llike a rex cannon where u get a straight view though it. now a question about it, is it either open or closed or can it be half...

thanks so we have worked out that it is a seat belt warning. but again it would be stupid and annoying to put my seat belt on to reverse it out of the carage, then take it off again to get out and close the door. all just to stop the warning going off. but i never no i might have an accident...

my old man has a SS and he had the walky pack put on it. it has changed the car so much. it has so much more pick up from down so low, the power is right there eeven at about 1500-2000, i drove it be fore and after and is easily worth it. the sound when he first got it dont wasnt much louder...

yeah putting ur seat belt on before u drive off is a good idea but when u only have to drive 20 meters or so to a gate then have to get out and open it u might find like we do that it might be more annoying.

hi. my dad has a VE SS and when he starts it up there is a chime that goes off for serveral seconds. what is this chime for, i thought it would have been the seat belts but the dealer said that they dont have a seat belt chime.??? this chime only goes for serveral seconds and stops even if...

how did u go get it all done? was it easy?

has any one fitted on of these yet. did it come with instruction or not?

it wouldnt be easy as the cars that come stadard with climate control have totally different wiring though out them. i thinu are going to have to get the wiring and computer out of a calais or such and then run it though ur car. alot of work

i wouldnt go anything else but alpine but the problem i see that ur going to have is that the standard head unit isnt going to put out enough thump to power good speakers to the max anyways please correct me if im wrong let us know what u go for

thats heaps windsurfer ur a true legend

windersurfer where did you get ur from i rang autobarn today and the cat 9 is bout $200 and cat3 $249 local audio dealer wanted $295 plus install did u get cat 9 unverisal one or cat 3 which is the one made for VY commo thanks any more info would be great

this cat nine unit you are talking about, is there any info on the net about it and is it hard to install. got any picture of how u mounted the IR sender. and what does the mode button do or is it programable.

i have used shell eco 10W30 now using shell ultra 5W40 and next change i am going to use castrol sport5W30. you only have to do changes every 15thou in the vy thats y it has the larger sump. but i normally change mine about 7 or 8 just depends how dirty and how it is looking at the time as i...

would neva go mild steel in headers as with the heat of the motor they are more likely to stuff up ur cat and they arent cheap stainless steel only infront of cats

do u need to do the push rods as well and can this job be done in the backyard?

as the super 6 only came with the auto's would it be possible to get that motor to bolt up to the 5 speed manual and what computer would need to be used.

yes i have done it and would do it again. car is alot stiffer and more direct through corners in the front. i had the local shop do it for me as it was goin to need a wheel alignment after anyways and i got the them adjust it to the maximum. as far as suspension mods go i think should be one of...

im not sure how they go but if u put some in i would love to hear how they go. F.I.T. is ment to make a nice set of 1.9:1 they are on the net with prices but i have also seen 1.97:1 but i forget where. hope that helps

ok cool, that is good to no neva thoguht of it like that. so would a mod such as roller rockets 1.9:1 would they give beta fuel economy because CAI header exhaust and the likes do make a little difference?

that wasnt really the worry i had. as if it changes the revs to be higher at the same speed then crusing at 100km then the car would be reving more and with my exhaust if it is a fairly noticalbe rate of change in revs then long trips may become a little drowney. that was more where my concern...

if u change ur diff gears will this mean that it will rev higher at the same speed. if so would this give a poor fuel economy

i got maxxis on my car now and they are crap would neva get them again. they had alright grip when brand new in the dry but as soon as it rained i didnt feel safe at all. now that they have worn down they are very oridinary. i didnt seem to get alot of life out of them either. thinkin of...

it cost me $1200 after discount. i work at super cheap auto so noramlly price we sell it for is $1600. My boss used to work at local holden dealer for many years and is a qualified machanic so he is goin to put it in for me might have to buy him a carton or something. ill let u know how it goes...

hi guys just curious to find out if anyone knows the weight of the standard dual mass flywheel, as i have just recieved my new solid exedy flywheel and it weighs ~13-14kgs (home scales) and i was interested to know if this is lighter then the standard one? if anyone is interested i have...

bad news. ths clutch has gone. good news. i can now get rid of that stupid dual mass flywheel and put in a solid item with a heavy duty clutch kit. the question for all of you out there is -what brands are good -- im looking at going with exedy??? -has anyone else gotten rid of the dual...

has anyone got anything to say. this isnt like this forum, not to have any ideas

hi everyone, i got a question for u all i have been driving my car around today and it was running great. then came home for lunch and let it sit for about 3 hours then went to go into town again. pull onto the highway like i normally do 1st,2nd,3rd,4th then at 80kms went into 5th and nothing...

i work at supercheap and have used the paint to a few cars and it has been on there now for almost a year now and no problems with it coming off. just had to make sure that u clean it back and i gave them a light sand. didnt have to use primer or anything just straight on. many lighter coats...