Search results

thanks for that! so do the normal headlights, not projector, take single beam as well? I'm just trying to work out why they keep advising of the hi/lo kit?

ohhh sweet. thanks for all that info. now do I need the hi/lo kit or single beam? the company seems to think I need the hi/lo kit

sorry I didn't state already, projectors have also been ordered. I did post a thread about it. any ideas if I need the single beam or high/lo kit? thanks

hi guys, I have the vy also. I was going to get the hid kit. would I need the single beam or hi/lo kit. I have the h4 low beam which I will be replacing. not touching the h1 high beam. so do I just replace it with the single beam kit? I spoke to one of the sellers and this was his...

Hi there. I was going to purchase a HID kit from the following site : http://www.delonixradar.com.au/hid-xenon/car-hid-lights/h4/dlx/50w/index.php#Questions I do a lot of rural driving and was going to install them in a projector headlight. I am a bit confused with which kit to...

Let us know how you go champ, i'd be interested to see how your consumption goes.

I forgot to check Repco! Thanks D3CID3R. PRAVX II S, thanks for the detailed response. Do most mechanics have this tool to check o2 sensors voltage? I just thought the cheapest thing would be to buy a set of o2's for $80 and to see if that helps, if not its only $80 that i'm down. What...

Where they from a reputable seller champ? Did they cause further problems or? What happens when they fail? Does your fuel just go through the roof or? Cheers

Thanks for the quick reply cander24, I just spoke to my mechanic and he can get them at trade for around that price. I appreciate your help though. I'm still leaning towards the aftermarket ones and saving $120ish. What is the worst that could happen? Wouldn't I be able to plug my old ones...

Hi guys, Currently my VY S Pack L67 is sitting around 17-19/100Km. This is all city driving with minimal highway driving. I believe this is pretty high for a V6, even though its supercharged. It has a Mace Cold air intake and is running a 10psi pulley. Plugs, Leads have been changed...

bummppppp!

Got the same car bud, just a series 2. How much is an exhaust for these babies? dual cat? Is it gonna make much of a difference in performance? I'd be interested to see how you go with the mods. Ive only put the 10psi pulley on, CAI next week (pod setup from MACE)

sorry to ask a silly question, but what can you actually do with these scanners? is it just a connection to your pc which shows you errors or can you modify gear changes etc? can someone give me a quick run down on them? cheers

COLD AIR INTAKE TO SUIT HOLDEN VZ V6 - Mace Engineering Group Mace all the way, cant go wrong with them!

Pics are now up Rob, Thanks

Hey Rob, its the stock one that comes with the Supercharged VY. I can get photos in the morning, but here is some quick pics of it i found on google from some commodores off of this site; there is the intake snorkel I was talking about. It goes to the airbox...

ITEM: VY V6 Airbox with snorkel that goes over the side of the radiator and a K&N Pannel filter to suit from my S/C VY K&N panel filter has been used for less than 4,000Kms and cost me $100 from Auto-one LOCATION: Wollongong NSW PRICE: $120 ONO PICK UP INFORMATION: Pick Up from Wollongong...

HAHAHA took the words straight out of my mouth.

At the moment I have the 10psi pulley and the k&n pannel filter installed on the L67. Im getting a nice whine out of her. If I was to get a kit like the one from mace : COLD AIR INTAKE TO SUIT HOLDEN VT-VY V6 - Mace Engineering Group would i get more whine? sounds like i might after reading...

cheers for that bud. im a bit skeptical of trying it myself, for the $200 id rather be safe haha. i just dont see myself doing the best of jobs at the 'boring' lol.. so Blairs will be able to hook me up with the nuts?? does that mean there will be no lock nut? can any fella jack my ride up...

thanks. where do I get these nuts from? I asked the tyre shop which will be boring them but they couldn't help me either

Hi guys, i was speaking to a member earlier about the install of VE rims on to the VY. Obviously you have to bore the centre of the rims. A local shop is charging $50 per rim. A bit steep i think. Im in Wollongong, and am prepared to travel to Sydney if anyone know where its done cheaper, but no...

louder induction?

found this photo on the L67 forum on L67torque. Would it improve anything or just wank factor?

If I was to cut a hole, the size of my fist in the bottom of the standard airbox on the VY L67 (the one with the stock growler looking thing) would it improve induction.? I would obviously cover it with some sort of flyscreen for bugs and other objects to stay out. would it cause the sensor...

HAHAHAHAHA I knew someone would throw that one in!!!! Appreciate the comments

Hi guys, just a quick question. A friend of mine is selling his 2001 Subaru WRX S shortly due to an increase in family members. He is willing to give it to me for $11,000... Here's a few stats and mods it has: 140,000 k's, 10 months rego, excellent cond. Tinted windows, lowered 2 inches...

Hi guys, didn't know whether or not this belonged here or in the electrical section, here goes anyway. I recently upgraded my headlights from the stock v6 type to the SS style headlight. It seems my lights are facing downward and not projecting far forward. I had a browse through the handbook...

think ive found the right ones guys, 1156 possibly

hey guys, just wondering what sort of globe i need to put in to the indicator in the headlights. Not the actual side indicator of the car, but the one in the headlights next to the h4's and h1's etc. Is it just a t10 wedge? are these it...

niceeee ride!!!! how much did peders charge for that job?

i just found these for the tear drops. cheers for the SMD advice! Pair T10 25 SMD LED White Holden commodore Ford falcon - eBay Other, Engines, Components, Car, Truck Parts, Cars, Bikes, Boats. (end time 27-Oct-10 02:34:11 AEDST)

photos of the lights installed

where abouts is the "go advanced button" on the page?

tried to insert picture, failing though! i cant just upload from my computer? its asking for a URL but i havent uploaded to any websites

okay installed today brodie, they look pretty magic! i left the t10 wedge(teardop) to see the difference in coour, geeze that goldy yellow orange light looks crap!! they are suprisingly very white with barely any blue. its a hard colour to describe. almost looks like daylight. they do the job...

cheers guys. heating the coils isnt a good idea is it? i wanted it about 40-50mm lower. have you guys got a rough idea on how much pedders would charge to drop it that much? ill have to go see them this week

cheers thought i was right. so does that mean if i put the 20's on the gap will close? or am i better off just lowering it with the current stock 17's?

ohh. i checked the badge under the bonnet that has all the engine and suspension specs and it says fe2? soo confused lol!

okay i understand you now. but the box says 60/55w, dows this mean they should be fine with the wiring? cheers