Search results

Hi guys, during a long 3hr drive last week (about 2hrs into it) I pulled up to a set of lights and I felt something was amiss! As I went to take off again the car was surging like the tranny was cutting in and out rapidly while trying to accelorate and under decelleration the tacho would...

Ahh ok thanks mate

Also is that a definite accurate answer boys?

Room for questioning though as the series 1 vn v6 was an l67 but holden bought them without the charger setup and changed the tune! So? Ill argue it with them! Our l67 we know is the yanks series 2 l67!

On the bright side the conversions a straight swap haha

Long story short, will it need to be engineered? Thanks guys

Hi mate im looking for a base tune for a vn series 2 v6 running an sc14 at 8psi asap! I pm'd you but not sure if you got it or not? Any help would be greatly appreciated! Regards dan

I think they did give me one but can only find the invoice at the moment? 3 kids & missus in and out of the car im not suprised lol! I think the wheel bearings are ok but ill suss them out tommorow!

I think they only gave me a tax invoice! Yeah im gonna try the spacers and if they dont agree with me ill just sell em and find another set!

And if by chance it was bent strut bodies what are the chances of both being bent eqaully? Cos both sides are the same!

I had 3 rims and found another 2 recently without even considering offset I snapped em up!

Theyre 18x8 48p vy ss rims mate! I have a set of 5 and one is a et+42 and it went on with plenty of clearance so just thought a set of spacers would allow me to run these 18s decently and get me off these seedy interceptors! Af racing at the top of the forums page are advertising billet...

I just had a wheel alignment yesterday due to fitting a new rack and there was no mention of bent strut bodies! The bloke did however ask me in disbelief how I drove around as it was for so long as the alignment was out a mile but it had only been like that a day or 2!

Hi could you please pm me a price on a set of 5mm spacers to suit a vn? Cheers

I just picked up a nice vn calais, 4months reg for $500! And a mate got one not long ago with 2months reg for a grandpa spec vn berlina he got for 200! His wouldnt turn over but refitting the starters trigger wire fixed that! And both have climate control which people keep telling me is rare for...

Yeah ive done some reasearch on spacers and found that I can run up to 5mm safely which is exactly what I need to get back to the vn's stock offset (+43) which will give me plenty of room to breath easy! It was hard enough to find a single or pair semi locally (drove an hour & a half each way)...

Ok so ive sussed them all out and have 4 with 48P stamped in em and 1 with et+42! Fitted the 42 to the front with plenty of clearance but the 48s definately rub on the strut!

Cool mate thanks! Im gonna try one off the rear on the front in the morning as the 3 I had initially were on my vs stato, 2 being on the front! Cheers mate

Yeah its kinda sqaure! Not sure about offset on them as I only had 3 vy ss rims and recently aquired another 2 to finally put them on! I tried to push a piece of cardboard thru where its obviously rubbing with no success!

Just checked again and thier definately 235/40s! Brand is full run! Model hp199! And its definately the inner sidewall rubbing on the strut just where the spring support starts to fan out from the strut itself!

Once I hit 50-60kph it starts getting fairly noisy!

I think its just scrubbing on the part where it fans out to support the spring?

Theyre some "full run" brand or something? Cheap crap id say? I bought a whole set of 18s just for the tyres to put on my vy ss rims!

Hi guys I finally got some new rubber on my vy ss 18s today and whacked them on my vn straight away only to hear rubbing on the first trip out! Got it home and had a look and they seem to be rubbing on the lower shock support? Only the front is rubbing and its definately not the gaurds etc coz...

Hi does anyone have any wiring diagrams or technical info I might need for this conversion? Any help is greatly appreciated!

Can an admin please scrap this thread im going to move it to electrical where it belongs! Thanks

Cool mate! Yeah I deleted fb I hate that site!

kitted vp submitted a new Showcase Item: 1991 Holden Calais Read more about this showcase item here...

Hi guys can anyone point me in the direction of the wiring changes etc needed for this conversion? And if anyones had any new breakthroughs on the demister vent dramas? I have all the vs stato under dash ducting if that helps? But mainly after the wiring diagrams/mods for the wipers, trip comp...

Whats remus? Im supposed to have one on my vp wags! I thought the bloke who sold me the car was just batty! Lol

Got a set of 6 vt supercharged injectors for 200ono or a set of 8 vn sv100 v8 injectors for 120!

ITEM: super6 white top injectors LOCATION: victoria, latrobe region CONDITION: Used PRICE: 200ono DELIVERY/PICK UP INFORMATION: pickup preffered but can post at buyers expense PAYMENT DETAILS: cash on pickup or direct deposit if postage required CONTACT DETAILS: pm me on here...

ITEM: vp calais instrument cluster LOCATION: victoria, latrobe region CONDITION: Used but in great condition! No bleeds! PRICE: 150ono DELIVERY/PICK UP INFORMATION: pickup preffered but will post at buyers expense! PAYMENT OPTIONS: cash on pickup preffered but will accept direct...

Narp doesnt look like it is the oil pressure switch:/ anyone got a match?

Narp dont think its oil pressure switch:/ any more ideas guys?

Someone said to me oil pressure switch! Could they be right? Ive gor a funny feeling they might be!

How we ould I know/fix it if it is immobilizer? Ive never used it! And thank you fxst01 I have gone thru everything I can think of 10 times over and I felt I was missing something! God damn oil pressure switch! I bet it is!

Yeah mate a v6

Yeah mate new ecu and memcal! Well I have power to the fuel pump fuse under bonnet, ecu has power, gas diode has power! Does anyone know if any sensors could do this?