Search results

Bump .. Want more of a response.

I have 2 spare clusters here just in case. 1 is level 1, the other level 2s out of an SS. But higher klms. L1 has 280k. L2 has 250k.

Think you'll find VT HIGH BCM is the ONLY BCM for speed sensitive power steering activation as it states in every manual

Just got my new Calais BCM (HIGH) to put in my Executive. What mods, looms, ect would I need to upgrade the powersteering rack? Is it as simple as a reman Calais rack, doubt it, but... Need advise.

try just checking the screws that hold the instrument cluster insides into the backing of the cluster.... you will have to take the clear, black and internal covers off off the front by the clips then you will see there is 4 hex screws that can be tightened by a flat head if you dont have one...

yeah i might just do that !! im guessing it would be considerably better steering !

yeah that worked with my low bcm thats in there now !

yeah got a remote with it and im aware of the wiper dewell timer, the auto headlamp switch and sensor, but i heared that i can get the speed sensor power steering and other stuff... as for power windows i have that in the bag. so... any others.... i think i can also get the anti theift horn...

Hi peeps, just wondering where i can find a specific listing of the differences between the codes of the BCM's, as in the different features. I have a series 1 LOW VT exec. and just picked up a HIGH VT Calais BCM for Nix and want to know what im going to gain ... I found it on the web...

photo of brakes the photo asked 4

mine is a NON abs and i also get no warning light on dash ! really pouring with rain at the moment so cant get photos yet might see about getting the valve checked you guys have been a great help !! will let ya's know of the outcome please continue to post if ya think of anything else :)

old mate: ok photos soon..... db_notso: as for how do i tell ... 1. under normal driving, when i washed the car, the rear rotors were super hot, expecially in comparison to the fronts. 2. its a slightly obvious back grab and rear pull down as opposed to forward front dipping or controlled...

for some reason my rear brakes are working harder than my front. i think previous owner changed all brakes for the twin cal type. could this be the reason why and if so is there a fix, if not any ideas!! ???

Hi peeps, I have a VT and I recently bought some 2004 seats for it. Thought I'd spoil her. On the center rear seat where once was nice plush deep grey velour fabric now has gone purple due to fading. Just wondering if anyone knows any products that I could use to re colour it. As opposed...

What's for free pm me

Message bump

Any pointers on where to find?

Message bump

greenfoam unavailable Inbox full

Looking for someone to spray my front Bathurst bar and side skirts after I repair them. Does anyone know someone cheap? I will supply paint, just need air compressor and spray gun. Or someone who likes to pay it forward as I'm a pensioner.

Check this: this is another possability as the ( dash illumination / Parkers ) light up the hazard switch and it could be wobbly pins shorting illumination pins with hazards / (indicator) pins... very common ! remove dash facia removed hazard button remove plug look in back of button...

yeah nothing works for indi's if hazard switch isnt plugged in !!

this happened to me !!! when you turn on indi's do the blow the fuse ? if or if not check your hazard light button pins .. mind tilted slightly and arched out when i put the indi's on but hazards worked ! so ... removed hazard button remove plug look in back of button check the pins when...

will give u a number to someone i know in cumberland Pk who is wrecking a vt white and i think the also have a new guard too... let me know of your interest

i will sus it out and post the outcome !

Fuel pump should be fine but will replace filter and see how I go. Cheers!

Thanks for that ! Makes alot of sense. Ok anyone need a xu-6 supercharged v6 memcal lol. Will swap for performance v6 memcal. LoL

Any reason why?

Hi just went round a long left exit on the road where I could still do 60kph while turning, while I was cornering the power steering got heavy and engine was non responsive. Then picked back up and was fine. Tank was full so it wasn't fuel flow. Any ideas? Auto-V6-97-VT

Hi I just bought a memcal for a supercharged v6 vt xu-6 and want to know if I could add this to my executive with exhaust mods no supercharger. Will it give any more power? Will it be any good? Worth doing?

Cheers guys will look into it tomorrow and let ya's know how I go

Hi peeps, Took my baby for a drive to Renmark and on the way home I noticed that at 110kph I took my foot off the acc. and it was like I had cruise control. (which I don't) So I knocked it into neutral as I was free of traffic and the rpm was sitting at 2000-3000. I pulled over and after a...

I bought a Opel cable USB. Thinking Opel / GMH. Same...? Does anyone have a commodore obd2 USB cable that I can Jerry up with my Opel cable. I'm thinking it's only 1 pin that's out. If anyone has any ideas please let me know. My Opel cable has the FT232BL chip for serial to USB. Will...

all gauges are working properly, and my gauge is setup like a factory gas install so i use the "fuel" gauge for the gas also

what am i doing wrong? i just got this cable off the net and it is in the diagnostic plug, and my lappy, and im running the efilive pro v4 registered, i have selected the gm-vt6 xml and chosen the correct com port whick has been assigned to the device and NOTHING... screen as follows...

Yeah it's hell easy like said previously, 1) open fuse flap, 2) undo 2 screws above cluster 3) 2-4 screws on dash shroud trim edge 4) pull trim towards you 5) release plug at back of switch with tab on bottom 6) push tab on switch just under circle section rear of switch 7) push switch...

Hi peeps, VT Exec '97 dual fuel (aftermarket) When on fuel always reads full When on LPG always reads empty (Changed cluster) When on fuel = full then after 2min empty When on gas always empty Checked wires into plugs. = fine. Checked holding mode etc buttons fuel in tank =0.0 Any...

thats great cause i just activated efilive v4 pro on the laptop with the vt xml ! in prep for this cable !

HEY GUYZ/GALS, Just a random question, would anyone be able to tell me if they think that this cable would work with holden VT ? Being that it works with OPEL which is Basicly GMH. I figured its a long shot but it might work ! Ebay Link Here - Press To View

Set 3 sold yet?