2009 ve sv6 ll Injector rail removal PLEASE HELP!

[Mon-aro]

I was about to change the fuel injector on cylinder 1 and i have been working all day trying to get the rail out with no luck! im just over it and just want to burn the whole car up!

tried to pry out and the cylinder 5 came lose but stuck where i the cylinder 1 is! it took me few hours and then another few hours just trying to place the cylinder back in the hole and no go! Please help! i have posted a couple posts last night regarding misfire and no replies yet...! im time critical and needs this sorted ASAP

 

[krusing]

Spray the bottom of the injectors with WD40,
Let it sit overnight,
(Its amazing what a little dab will do !)
make sure all the bolts are out, and the loom is disconnected,
And "GENTLEY" PRY the injector rail up.
Or
you just Monkeying around with us ?

 

[Mon-aro]

Mate i wish i was! and i just sorayed WD40! hope that will do the trick!

 

[krusing]

There is 2 posts for the same question!

 

[Mon-aro]

There is 2 posts for the same question!

Yes i asked on some1 else's post and then thought to post my own to get a quicker response