Holden4runner
New Member
- Joined
- Apr 4, 2022
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Age
- 22
- Location
- Byron Bay
- Members Ride
- 304 Swapped 4 Runner
Hey Guys,
Just changed my waterpump on my 304 and now the alternator isnt charging the car enough to kick over. It builds compression in the first cylinder with the key on and then once I pull off it almost reverses the compression and spits it out the other way. (I hope this makes sense, if not, I have videos linked below).
At this point, I have managed to get the car started using a jump pack. The car ran fine, I left it running for about 10-15 mins and after switching it off, it still wouldn't start under its own power.
As far as I know, I just put everything back the way I pulled it off, but when it came to the bolt for tensioning the alternator, I forgot what side the spacer went on, but other than that, I'm really unsure as to why this is happening.
Any help would be greatly appreciated!
(In car Footage): https://youtube.com/shorts/gqW6I5pL9A8
(Engine bay Footage):
Let me know if you can't view them!
Thanks guys.
Just changed my waterpump on my 304 and now the alternator isnt charging the car enough to kick over. It builds compression in the first cylinder with the key on and then once I pull off it almost reverses the compression and spits it out the other way. (I hope this makes sense, if not, I have videos linked below).
At this point, I have managed to get the car started using a jump pack. The car ran fine, I left it running for about 10-15 mins and after switching it off, it still wouldn't start under its own power.
As far as I know, I just put everything back the way I pulled it off, but when it came to the bolt for tensioning the alternator, I forgot what side the spacer went on, but other than that, I'm really unsure as to why this is happening.
Any help would be greatly appreciated!
(In car Footage): https://youtube.com/shorts/gqW6I5pL9A8
(Engine bay Footage):
Let me know if you can't view them!
Thanks guys.
Last edited: