I just looked didnt know anyone looked at it
Love the rims tyres are expensive enough let alone low profiles
Ok it needed a bit of work
Replaced 15 hydrolic hoses, none were leaking just old and potentially ready to leak.
One Ram was bent and a new one in the process of being built
one of the locking rams on the side shift needs seals
front axel bush needed replacing
a few electrical gremlins
reconnect and make a new hand throttle
weld up some rust holes & cracks
rebush and pin the hoe attachment
new air cleaner precleaner
new windscreen
o ring on the fuel bowl
finally a little body work straightening and give it a new coat of yellow
Its needed heaps of little jobs doing to it which are all taking heaps of time.
All in all its a good machine for its age and could have nearly been put to work as I bought it but im going right over it. The perkins deisel has been rebuilt and runs great, main pump was dont a few years ago, RB conversion no way gotta be a V8
, actually it would be tempting to turbo it but its got enough grunt for whats needed.
When im finished it will effectivly have had a rebuild over the last 5 years basically with me finishing it off, engine, gearbox and diff & wet brakes were all dont prior to be getting it
cheers
Scott