Alloytec and SIDI Cam Development

[Kiddo]

You can get about 40rwkws with a dry setup literally plug and play. What I mean is that at 40kw you wouldn't have to retard your ignition(if it is stock, but if it were tuned by MACE already you would have to retard it further to start off with). But at 55kw you would have to retard you ignition by 2 degrees; 75kw by 4 degrees, ect. I believe MACE would be able to do this quite easily though.

This is the kit for the LLT. It only operates at full throttle. It seems pretty well rounded for a dry setup.

2010 V6 Camaro nitrous system

And Installation

Nitrous is good, don't get me wrong, but it can go soooooooo bad very quick.

 

[Immortality]

Nitrous is good, don't get me wrong, but it can go soooooooo bad very quick.

It can, for that reason you really should run extra filters, both on the fuel and nitrous lines. You should also run a hobbs switch on the fuel line so that if the fuel pressure drops the nitrous is cut off, prevents melting pistons

 

[sv6 power]

Has anyone else put any Mace cams in their engine?
Would be good to get a bit more feedback on how the cams feel in your car.

 

[Tommo_27]

Mine are going in next Friday. So will let you know then.

 

[Dannybrian]

Has anyone else put any Mace cams in their engine?
Would be good to get a bit more feedback on how the cams feel in your car.

Good to see it get back to subject haha.
My car is still getting done, as I told them I don't have a licence so they can take there time and put important jobs first. Although must be soon!
The suspense is killing me.

 

[Mrcorehh]

Good to see it get back to subject haha.
My car is still getting done, as I told them I don't have a licence so they can take there time and put important jobs first. Although must be soon!
The suspense is killing me.

That's gayy, I'm friends with Jamie that works at JC. I'ma tell him to hurry the hell up

 

[Dannybrian]

It's all ready! Picking it up today, Although it needs to go on the dyno asap for a tune.

 

[Dannybrian]

Mace engineering your ve cams are sic! Haven't got it dyno tuned yet but is running great! <3

 

[sv6 power]

What profile cams did you put in?

Glad to hear your car is in your possession again. Can you list what aftermarket parts you used in the rebuild? Or you just used standard holden parts?

 

[MACE]

Mace engineering your ve cams are sic! Haven't got it dyno tuned yet but is running great! <3

Ah excellent

What profile cams did you put in?

Glad to hear your car is in your possession again. Can you list what aftermarket parts you used in the rebuild? Or you just used standard holden parts?

Danny has the 210 cams, as for the other parts I'm not sure