wrx884
WA's ASR Rep
- Joined
- Mar 28, 2006
- Messages
- 3,687
- Reaction score
- 38
- Points
- 48
- Age
- 39
- Location
- Perth
- Members Ride
- VT Exec/ VT L67 Spac, 5L VP Calais, 77 TC Gemini
yer it is a pain in the arse lol as 4 the bearing infront of the circuit board there is only 1 bearing there with a smaller spring than the other 1 and the bearing just sits on top of that if u have the switch sittin up right the bearing and spring goes up the top, that 1 usually comes out pretty easy if ya drop it or knock it as it uses the circuit board 2 hold that whole bit in place.
with that metal bit ur talkin bout i know wat u mean it is hard 2 explain wat it is haha but it has like 3 pins stickin out kinda thing ay??? 2 pins point on the left side kinda ona downward slant and the other 1 on the other side just sits where eva u put it n should b on the right side kinda facing upwards a lil hope that makes sense 4 u i have a couple spare with me if ya still get in the **** lol n cant fix it ???
that bit attatched 2 the dash, is it part of the light switch itself?? like the light switch housing u could call it???
with that metal bit ur talkin bout i know wat u mean it is hard 2 explain wat it is haha but it has like 3 pins stickin out kinda thing ay??? 2 pins point on the left side kinda ona downward slant and the other 1 on the other side just sits where eva u put it n should b on the right side kinda facing upwards a lil hope that makes sense 4 u i have a couple spare with me if ya still get in the **** lol n cant fix it ???
that bit attatched 2 the dash, is it part of the light switch itself?? like the light switch housing u could call it???