cam to stall and diff

[eaton v8]

well im still waiting for the oil system off rb racing but these are some picks of the other goodies that have turned up and im waiting for a magna fuel fuel reg and aeroquip 1/2 socketless fuel line and fittings from summit.

 

[SICK SS]

vu ss ute 3924lb race weight, ls3 427 stroker 11.1 @ 121 mph

 

[SirNemesis]

That filter is too small for that turbo. Not enough filter-surface area.

 

[one_and_only2004]

Are they ID injectors? Mine never came in a fancy box...

 

[pjdm1980]

Any updates?

 

[eaton v8]

Ok been away for a while but just did the last wedding so it's time to modify the 3.9 have been swapped out for 3.07 and I figured out how I think I will hang the turbo using these so little steps and it will all come together I'm not going to rush this

 

[eaton v8]

Ok did a little bit more yesterday I fitted the intercooler and I'm stoked that I didn't have to cut any of the steel and people a nut sert machine is well worth the money

 

[eaton v8]

Due to the size of the cooler it had to go here. it is 5mm off the extractors so I'll find something to fit in there to help block the heat.

 

[one_and_only2004]

Being so close I would have thought ceramic coating and heat wrapping might be a good idea

 

[eaton v8]

ill look at that i have wrap left over but i am going to send the intake pipe to get coated to keep the heat out so i may send it off as well i also thought of getting the little shield that the ls1 have to protect the computer from the heat