$heepy
New Member
- Joined
- Aug 19, 2010
- Messages
- 26
- Reaction score
- 0
- Points
- 0
- Location
- adelaide hills
- Members Ride
- vz tonner
just wondering what could be the problem with a vz alloytech 4 speed.
the problem im having seems to be when in normal mode on the gear selector when revving hard (6000rpm +-) between gear changes it will throw up the check powertrain error light and will run roughly until you can get a chance to get off the road turn it off and start again. once cycled off and on it will run fine until you are overtaking or revving the engine hard again.
if you have the car in power mode it hasnt done this yet.
the trans oil is full on the dipstick albeit a bit brown, but definately not burnt badly or anything.
has anyone had this problem before? all my google seaching comes up with other errors which cause the check powertrain to come up but nothing specifically relating to this problem.
thanks.
the problem im having seems to be when in normal mode on the gear selector when revving hard (6000rpm +-) between gear changes it will throw up the check powertrain error light and will run roughly until you can get a chance to get off the road turn it off and start again. once cycled off and on it will run fine until you are overtaking or revving the engine hard again.
if you have the car in power mode it hasnt done this yet.
the trans oil is full on the dipstick albeit a bit brown, but definately not burnt badly or anything.
has anyone had this problem before? all my google seaching comes up with other errors which cause the check powertrain to come up but nothing specifically relating to this problem.
thanks.