ConnorJames05
Member
- Joined
- Jul 1, 2021
- Messages
- 41
- Reaction score
- 10
- Points
- 8
- Age
- 23
- Location
- Adelaide
- Members Ride
- VT Berlina S2
hey guys,
ecotec overheated few days ago, spilled coolant out of what i assume is the ressie. filled it back up and bled it, drove home fine.
read the codes the cars throwing, as the check engine light came on a few times for 10 seconds over the last month, thought nothing of it.
Codes 13 (right hand oxy sensor no signal), 48 (cam angle sensor), 76 (a/f ratio variation) and 92 (low speed fan fault (wonder what this caused? huh))
should i just replace the sensors and **** around and find out after?
cheers!
ecotec overheated few days ago, spilled coolant out of what i assume is the ressie. filled it back up and bled it, drove home fine.
read the codes the cars throwing, as the check engine light came on a few times for 10 seconds over the last month, thought nothing of it.
Codes 13 (right hand oxy sensor no signal), 48 (cam angle sensor), 76 (a/f ratio variation) and 92 (low speed fan fault (wonder what this caused? huh))
should i just replace the sensors and **** around and find out after?
cheers!