Thought I should stop being lazy and post up my interior.
Basically its fully stripped, dash and everything behind it out. Every piece of interior, carpet sound deadening door cars. Everything, except the steering column. I still have power windows.
I Bought a genuine sparco fixed back seat mounted it in with custom brackets but still attained the existing rails so it has tilt and slides forward/backwards. Steering wheel, hydro handbrake (asd Motorsport not a cheap random ebay one) which is cut inline to the rear brakes. Cube shifter (rip shifter knock off) with a brass bush. Had to file the bush down a bit because it wouldn't allow me to shift into reverse. Its also super tight and allows me to bash 2nd to third diagonally and never misses. Its great. Had To weld the handle together as the 2 bolts just wont hold even with strong lock tight.
Passender is just a random bucket seat my mate had till I can afford another fixed back sparco. 6 point harnesses for both seats, Mounts are bolted to the floor with a 3inch plate 3mm thick both sides of the floor and rear wall shelf.
Folded up some sheet metal to construct the dash, made sure I allowed room for the cage (which will be built this time round) installed oil temp, oil pressure and water temp gauges.
Switches include.
- Parkers/brakes
- Headlights
- Power steering, water pump and fans
- Fuel pump
- Ignition
- Push button start.
- Wipers single speed
- Lights, tray/interior/engine bay
- Isolator switch
- Hazzards
Ignition barrel was relocated onto the dash. To retain some form of security so without a key it wont start. The dash cluster was binned and my mate gave me his ASUS tablet. OBD2 wireless scanner was connected downloaded and paid for Dash command which gives me allllllllll the settings the ECU Collects. Timing, water temps, intake temps, revs, speedo etc etc. Only issue is that because its wireless there is a little delay. Not a concern for me as I'm not requiring up to date accurate information. ECU is relocated up under the dash as well as a very basic stereo. (love my music)
Only things I need to do to the interior is new passenger seat, cage, boost gauge and to build a box over the rad pipes and insulate them to stop some of the heat for the passenger.
Also have a fire extinguisher in the car.