Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Ahh for sure man, you've got the buisiness name sorted, I'll come and do some work with ya!
Mine come out fine so im just going to leave them i ahve to fix up my split pins in the bottom they keep falling out and my poppers falling down into my doors...lolyeah, easily, just strip out all the doors, do all the welding and grinding, then get one layer of bog - or as many as possible? then the second day for blocking flat four doors, or two if its a ute?!!
Do-able!!
I was thinking about getting those spring loaded popper things for mine, even just the fronts, to throw the door out an inch or two... but might even look into the electronic side of things as well - I dont mind the rods on the doors but, with a nice top bit on them...
Mine come out fine so im just going to leave them i ahve to fix up my split pins in the bottom they keep falling out and my poppers falling down into my doors...lolyeah, easily, just strip out all the doors, do all the welding and grinding, then get one layer of bog - or as many as possible? then the second day for blocking flat four doors, or two if its a ute?!!
Do-able!!
I was thinking about getting those spring loaded popper things for mine, even just the fronts, to throw the door out an inch or two... but might even look into the electronic side of things as well - I dont mind the rods on the doors but, with a nice top bit on them...
lol, I ended up just poking a hole in the white plastic thing, with an 'o' ring pick, (like a metal toothpick, but bigger) lol, and sticking a piece of the round bar through it with a bend on one end, its a snug fit in the plastic bit, so it doenst fall out!!
Yeah man, for sure, maybe leave the flutes out until I see if this one will hold up - no cracks... de-badging the rear lion, filling in spoiler holes / fitting spoilers... the list is endless.....
Haha.. to right man... everyone, don't read our previous posts, lol!
Another one, flared and rolled gaurds, to suit the 20's and give it a nice look...