Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
ford t5 into vh 308 clutch issues
- Thread starter benny999
- Start date
vkberlina
VK Madman
- Joined
- Mar 12, 2004
- Messages
- 3,518
- Reaction score
- 45
- Points
- 48
- Age
- 44
- Location
- NSW Central Coast
- Website
- www.members.westnet.com.au
- Members Ride
- VK EFI 5L, VK 134 Pack, LX8 Adventra, MF35 & MF50b
When I built my VK I made my own tailshaft up using compatible ends, unis etc and welded it up, with careful measurements & planning you can get it spot on, I ran mine un balenced for about a year then finally went to get it balenced and it was within .03 of a gram, the guy actually asked me if it was a factory shaft.
scott
scott
benny999
New Member
- Joined
- Mar 15, 2008
- Messages
- 145
- Reaction score
- 0
- Points
- 0
- Location
- Melbourne
- Members Ride
- Vh sle 5ltr 83
Ahh kk well I have to modify mine at the front section did u gave to do that to yours Scott I have a vn diff and tailshaft in mine I already shortened the rear section when it was still auto and that come up good just gotta do the front section for the t5
---
I am here: http://maps.google.com/maps?ll=-37.664320,145.543493
---
I am here: http://maps.google.com/maps?ll=-37.664320,145.543493
*uwishn*
Holden special vehicles
- Joined
- Jul 10, 2010
- Messages
- 648
- Reaction score
- 2
- Points
- 0
- Location
- sydney
- Members Ride
- vl walkinshaw(replica)nissan navara d40 st-x turbo
Hey bloke dellow conversions in revesby have told me it is defiantly my clutch cable he customs makes them for $100 give em a call might fix your problem also,
i will let you know how i go with mine.
i will let you know how i go with mine.
benny999
New Member
- Joined
- Mar 15, 2008
- Messages
- 145
- Reaction score
- 0
- Points
- 0
- Location
- Melbourne
- Members Ride
- Vh sle 5ltr 83
Uwishn a vn manual front section ? Nah I have a full vn tailshaft in mine mate I know I did it myself haha
---
I am here: http://maps.google.com/maps?ll=-37.648958,145.535107
---
I am here: http://maps.google.com/maps?ll=-37.648958,145.535107
benny999
New Member
- Joined
- Mar 15, 2008
- Messages
- 145
- Reaction score
- 0
- Points
- 0
- Location
- Melbourne
- Members Ride
- Vh sle 5ltr 83
Is the yoke the same ??? On the vn manual shaft
And a v8 or a 6 one sounds like the go
---
I am here: http://maps.google.com/maps?ll=-37.648961,145.535034
And a v8 or a 6 one sounds like the go
---
I am here: http://maps.google.com/maps?ll=-37.648961,145.535034
*uwishn*
Holden special vehicles
- Joined
- Jul 10, 2010
- Messages
- 648
- Reaction score
- 2
- Points
- 0
- Location
- sydney
- Members Ride
- vl walkinshaw(replica)nissan navara d40 st-x turbo
not sure ay,i honestly did not try put the whole vn shaft in,i was told to do vn front vl rear.
wish i did try now would of saved a bit buying a bloody vl v8 shaft lol.
wish i did try now would of saved a bit buying a bloody vl v8 shaft lol.
benny999
New Member
- Joined
- Mar 15, 2008
- Messages
- 145
- Reaction score
- 0
- Points
- 0
- Location
- Melbourne
- Members Ride
- Vh sle 5ltr 83
Yeah so use a vn manual front section because I no the auto one is way to long and out of a 6 or a 8
Yeah very keen to see how ur cable goes let me know cause I'll get one and one of there clutch forks as well cause I snapped mine haha
---
I am here: http://maps.google.com/maps?ll=-37.648961,145.535034
Yeah very keen to see how ur cable goes let me know cause I'll get one and one of there clutch forks as well cause I snapped mine haha
---
I am here: http://maps.google.com/maps?ll=-37.648961,145.535034
benny999
New Member
- Joined
- Mar 15, 2008
- Messages
- 145
- Reaction score
- 0
- Points
- 0
- Location
- Melbourne
- Members Ride
- Vh sle 5ltr 83
Sweet that sorts out a lot of dramas for me
What about the slip yoke
---
I am here: http://maps.google.com/maps?ll=-37.648961,145.535034
What about the slip yoke
---
I am here: http://maps.google.com/maps?ll=-37.648961,145.535034
