losh1971
Well-Known Member
- Joined
- Jan 17, 2010
- Messages
- 22,731
- Reaction score
- 22,590
- Points
- 113
- Location
- North Tas
- Members Ride
- VE Series I SS Ute
I was just throwing it out there trying to get a 340 to fit and engineered would be a bit of a nightmare and if it's a street car getting it registered would be a nightmare at best. We don't know how serious the OP even is? If the OP wants a 340 they should be available in the States reasonably easy, plenty of Dodge had them and they have so much parts availability and could no doubt get injector manifolds to suit. If the OP has endless money then might as well go Hellcat. OP would just need to import the trans to suit rather than messing around with GM options. Have to ask yourself though is a VS worth the $120k build. You could visit the States and import an old Dodge Charger for similar money with Hellcat installed and probably have something that will probably increase in value.The 340 is pretty hard to find these days as they were only put into a few aussie cars in a single year (might be wrong with the time frame)
The 360's actually respond well to a little tickling internally....Mild cam, head work, 4 barrel carb and manifold....These would be easier to find than a 340 but still getting hard to find....I'm not 100% sure whether there is a stroker kit for the 360's, but a little investigating would reveal the answers to that one.
Alternatively go the 318, as they are more common and they actually do a stroker kit for these.....