Fonzie
Just lost the game.
The speed alert in my vs early series 2, you hold down the two outside buttons while the ignition is off, crank until the engine is running and release the buttons... the red led will be flashing, and you will have a digital readout of your speed. Mate of mine pulled his apart and bridged those two button contacts, and put a resistor in place of the LED... Permanent digital speedo!
Holding down the set button while starting the car has different results. According to the VS II car manual... The speed alert has 4 preset speed settings. 110, 100, 80 and 60. If you press set and up at the same time, or set and down at the same time, it goes to the nearest preset in that direction. If you hold SET, start the car, and release set, You get the ability to change those presets. The number will be flashing. Change it to what you want, press set, repeat for each preset...
Ah, the things you an learn from reading the instructions.
Holding down the set button while starting the car has different results. According to the VS II car manual... The speed alert has 4 preset speed settings. 110, 100, 80 and 60. If you press set and up at the same time, or set and down at the same time, it goes to the nearest preset in that direction. If you hold SET, start the car, and release set, You get the ability to change those presets. The number will be flashing. Change it to what you want, press set, repeat for each preset...
Ah, the things you an learn from reading the instructions.