[VT-VX] How to install VY/VZ Sunglasses holder in VT/VX

[anarklov3r]

Jiffy - Take a picture of your roof console, ill try work it out for you.

Slick - Pull down your roof trim and have a look if you have the mounts, if so you should be able to do it.

 

[Fonzie]

Installed a sunnies holder in my VS exec a few months back... Very happy with it. You seemed to make the wiring job slightly more complicated than needed? You could have just gotten a hold of the male version of that plug... Either that, or just used four spade bits. It seems it was a lot easier for you to mount.. There is nowhere near as much room between the headliner and the roof in the VS. Looks great :thumbsup:

 

[anarklov3r]

The other end of the factory loom is pretty hard to get a hold of. Spade connectors could have worked, but would have been a pain to disconnect / match up if i ever had to take it apart. This is just easier. Plus it looks alot more professional, and im a bit of a perfectionist when it comes to wiring and my car

 

[Fonzie]

Fair enough, I ended up using new plugs right through aswell.

 

[jiffy]

Jiffy - Take a picture of your roof console, ill try work it out for you.

It's identical to yours, looks the same as the pics, just without the black wire....

 

[anarklov3r]

black wire is the ground for independant switchs. It should work if u just dont hook it up.

 

[MR_VX]

have you got the template for this mate? i wanna print one out

 

[anarklov3r]

Ill scan it and upload it onto here once i get back from work tonight. Totally forgot about uploading it earlier! Sorry guys!

 

[MR_VX]

lol thats cool mate it will be handy tho

 

[Lumps of cheese]

Fantastic write up and a great mod, well done.