VFSV6FORME
Well-Known Member
- Joined
- Mar 9, 2016
- Messages
- 2,603
- Reaction score
- 1,273
- Points
- 113
- Age
- 74
- Location
- Brisbane
- Members Ride
- WN Caprice V 6.0L, VE Anniversity V6 Series 1
I give you an example. Just imagine if you took the 4 glass globes out of your 4 original lights and soldered wires on them and matched them to there original position and soldered them across the HSV LEDS lights. The BCU would think that you put the original lamps back in (message gone) and the extra resistance of the LEDS in circuit would possible be jack Sh..it for the body control unit. Now if you then take the globes out again and stick a multi meter across them they will measure resistance like a typical resistor. Yes this is just an example and yes all four globes would light up in your boot connected like this with no message on your dash