Huston, we have a problem.

[Morton]

What did you have in mind with a 9" and a hammer?

 

[Reaper]

bring it around and you'll find out. If they fail I also have a chainsaw, 2.5ton towing capacity on the VE and a natural gas BBQ.

Reaper

 

[Morton]

I think I can see where you're going with this

 

[Reaper]

I think I can see where you're going with this

Yep - straight into another beer
I am at my engineering best after a few beers.

Reaper

 

[Calaber]

And if Reaper's gear doesn't shift it, I can supply some plastic explosive......

 

[rob drag racer]

id go a slide hammer and a bolt threaded into it trust me it will come out :thumbsup:

 

[greenfoam]

I wont come out morton! you're going to need to take the cover off, then the cam will fall out accidently

 

[rob drag racer]

I wont come out morton! you're going to need to take the cover off, then the cam will fall out accidently

HAHAHA now i can go with that it sounds like having a hole in your block and someone saying well theres ya problem :clapping::clapping:

 

[Morton]

Ahhh dear... well, there's a little progress so far.

I cut up a large adjustable wrench with my angle grinder, and used it as an open pry lever. That, plus the force of my second largest sledge hammer has pulled the sleeve out 1".

I'm now going to try and drill through the exposed sleeve and throw a screwdriver through it. Maybe see if I can twist it a few times and loosen up the gunk behind it.

Here's hoping

Thanks for the ideas sofar guys ^_^

 

[Morton]

Well that didn't work. The bit that was poking out just snapped haha

Back to square one, only the big sturdy things I was using as washers for leverage are now all broken