Instrument cluster bad Integrated chip

[Kloz]

Alright, I opened up my cluster today and It was Slightly different from the above picture, anyway i changed the both capacitors and still testing, but i suspect that the speed needle is not telling the correct speed even though it’s on the same Position i recalibrated it. I was testing the cluster the Speed needle is slow on 15 or 20 kmph then feels smooth on 40 60s not sure if it’s correct or not انت عندينا اس اس

Some component might be placed in different location.. but make sure that the set the needle properly in the resit position.. slightly under 0km and use the engineering mode to check all the needles موتوي LS