Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Is this wiring kit any good?

JAKE-26

New Member
Joined
Feb 22, 2010
Messages
120
Reaction score
0
Points
0
Location
Croydon Hills, Melbourne
Members Ride
'97 VT Exec

Philthy

That dent guy
Joined
Aug 28, 2005
Messages
2,047
Reaction score
22
Points
0
Location
Melbourne
Website
www.qbdentfree.com.au
Members Ride
3.0R Liberty, XC Falcon
What amps are they? A single 4awg power wire won't be enough for a fairly big 2 amp system.

You are right though, wiring brands doesn't matter as much as some would have you believe
 

Fun_Bucket

New Member
Joined
Mar 23, 2009
Messages
2,990
Reaction score
9
Points
0
Age
38
Location
Cairns White Rock
Members Ride
Cruze II sri
Why not just spend a little extra and buy two seperate 4 awg wiring kits?

You said you allready spent a bit so far, so why skimp now? You don't have to go nuts and buy silly brand name kits that don't make stuff all difference as mentioned above, but atleast do it properly.
 

PRAVX II S

Member
Joined
Jan 21, 2010
Messages
918
Reaction score
7
Points
18
Location
Australia
Members Ride
Commodore
Dont go tight on cables.
Use thick power and earth cables. You can also wire up your own RCAs. Go to jaycar or Waggner to buy your RCAs if you are putting the ends on.
get quality RCAs.
 

JAKE-26

New Member
Joined
Feb 22, 2010
Messages
120
Reaction score
0
Points
0
Location
Croydon Hills, Melbourne
Members Ride
'97 VT Exec
Response AA0426 4 x 100wrms
Alpine mrp-m500 mono 1x 500wrms. someone recommended me to split the 4 into two 8's for both amps.

Yeah considered going to jaycar, but saw this pack and as it had what someone recommended me i thought id have a look.
And I've already spend a bit of money so i meant i don't wanna spend too much more as money doesn't grow on trees :(

Should i buy a 2g and split it into 2 4ga's?
 

PRAVX II S

Member
Joined
Jan 21, 2010
Messages
918
Reaction score
7
Points
18
Location
Australia
Members Ride
Commodore
I would run 2gauge to both amps.
In my car i am running pioneer amp 2x 125rms for my splits 2 gauge power and earth.
Mono block 0gauge power and earth.
 

JAKE-26

New Member
Joined
Feb 22, 2010
Messages
120
Reaction score
0
Points
0
Location
Croydon Hills, Melbourne
Members Ride
'97 VT Exec
Not quite sure what you mean, but i was told running a 6m 4awg power cable to a distro block, then 2 short 8awg cabled coming from the distro block, one to each amp
 

Fun_Bucket

New Member
Joined
Mar 23, 2009
Messages
2,990
Reaction score
9
Points
0
Age
38
Location
Cairns White Rock
Members Ride
Cruze II sri
Just run 2 seperate 4 awg cables, don't worry about who ever told you to split a 4 into 8 awg, that's just silly.

Why spend money on a distro block so that you can just run a smaller gauge cable?
 
Top