Jackv8
Active Member
- Joined
- Apr 26, 2012
- Messages
- 500
- Reaction score
- 90
- Points
- 28
- Age
- 39
- Location
- Gold Coast
- Members Ride
- 2012 SS-V II
No I didn’t check pushrod length, Tightened them all just so you could move the sides of them then turned crank until each was not under pressure they all took a fair bit to tighten up and aligned themselves in the middle of the spring!did u check pushrod length ? from the point the rocker was against the pushrod and valve with no play how many turns did the rocker bolt take to do up ? thats a simple way to check pre load
I guess I’ll know if something unusual happens on first start up then I can start with that.
This is how they sat before putting covers back on
Attachments
Last edited: