LSD diff any good?

[Immortality]

Oh ok sweet I’ll have to give this a go. What do you torque up to check the diff? Would it be the yoke or something? I’ve never done one before. Thanks bud!

You need specialty tools. These are mine. Home made ....

 

[HoldenHoon]

That is not a date. It's the ratio. 3.07

Ah that makes much more sense. I thought they were stamped on a different side of the gear. Thanks for the correction mate

 

[HoldenHoon]

You need specialty tools. These are mine. Home made ....
View attachment 264818View attachment 264819

oh that’s sweet as, can you buy these tools from anywhere?

 

[Immortality]

I cut down a spare axle and ground a 27mm hex onto the end so I could put a socket on it. The other bit is a spare axle hub.

 

[HoldenHoon]

I cut down a spare axle and ground a 27mm hex onto the end so I could put a socket on it. The other bit is a spare axle hub.

Just tested it today using a jig my mate has made awhile ago for his diff. Using a torque wrench it made between 120-145nm. He’s torque wrench is a bit crappy so I’m hoping can get my hands on a more reliable one.