Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
MACE/VCM OTRCAI for VE 3.6L SIDI V6
- Thread starter MACE
- Start date
MACE
Well-Known Member
- Joined
- Mar 30, 2008
- Messages
- 3,187
- Reaction score
- 102
- Points
- 63
It probably sounds familiar too being your car
vsv6dude
Member
- Joined
- Apr 26, 2010
- Messages
- 196
- Reaction score
- 1
- Points
- 18
- Members Ride
- vs v6 wagon
K & N Filter ?? Not for street car.
K & N lets in too much dirt. Common feedback one a major oil blog site in US.
My VS V6 K&N panel filter had lots of small pin holes when you put it up against a light.
Took it out. Will not reuse K&N.
Use a good cellulose fibre filter instead like the OEM original
This is just IMHO and I do not wish to start a debate.
K & N lets in too much dirt. Common feedback one a major oil blog site in US.
My VS V6 K&N panel filter had lots of small pin holes when you put it up against a light.
Took it out. Will not reuse K&N.
Use a good cellulose fibre filter instead like the OEM original
This is just IMHO and I do not wish to start a debate.
MACE
Well-Known Member
- Joined
- Mar 30, 2008
- Messages
- 3,187
- Reaction score
- 102
- Points
- 63
True
They also use K&N filters on some military vehicles as well (helicopters?), so I genuinely don't believe that they too. In saying this though they need to be maintained properly, which is where the cellulose fibre element shines as it's maintenance is as simple as discarding and replacing
MACE
Well-Known Member
- Joined
- Mar 30, 2008
- Messages
- 3,187
- Reaction score
- 102
- Points
- 63
Ok finally got around to sorting out a test fitment on our OTR kit to suit the latest LFW/LFX V6s as shown in the pics below
Admittedly ran out of time yesterday, with some small touches needed to neaten things up a little but you get the idea
Admittedly ran out of time yesterday, with some small touches needed to neaten things up a little but you get the idea
vongy10
Active Member
- Joined
- Feb 9, 2011
- Messages
- 1,194
- Reaction score
- 8
- Points
- 38
- Location
- Gunnedah
- Members Ride
- CV8 Monaro V2
Ok finally got around to sorting out a test fitment on our OTR kit to suit the latest LFW/LFX V6s as shown in the pics below
View attachment 146057View attachment 146058
Admittedly ran out of time yesterday, with some small touches needed to neaten things up a little but you get the idea
This is great news Steve. When will these be released and how much will they be going for?
MACE
Well-Known Member
- Joined
- Mar 30, 2008
- Messages
- 3,187
- Reaction score
- 102
- Points
- 63
They'll be around the $600 mark and will probably be released in about 1 months time
Cheers,
Steve
MACE
Well-Known Member
- Joined
- Mar 30, 2008
- Messages
- 3,187
- Reaction score
- 102
- Points
- 63
"Hey Steve are these done yet?"
They are, just stock is limited at the moment grrrr
"And is there a specific model for the SIDI?"
We only have them for SIDI at the moment
"Also what is the rwkw power increase and how much will it cost."
I couldn't tell you an exact figure sorry. All I know is that it out flows it's nearest competitor by around 15-20%
"Will it require a tune?"
No, ideally yes though
If you have any more questions please don't hesitate to ask.
Cheers,
Steve