MAP Sensor Connection Plug male end broken, Need replacement

[Fu Manchu]

I dont think it is a coolant temp sensor, but i could be wrong. Im only going from what i see visually and it looks like the correct spot just a broken plug.

It’s the coolant temp sensor. The sensor will be either white or black. Yours is white.

MAP sensor is located on the back of the intake manifold and has three wires.

 

[Fu Manchu]

The sensor in the back ground there, it’s not in the manifold. It’s in the cylinder head next to the exhaust manifold.

The MAP sensor is at the back of the intake manifold on top of the engine. The big black plastic thing. It has three wires.

 

[Fu Manchu]

The plug.

https://www.efisolutions.com.au/2-pin-delco-gm-holden-water-temp-connector

EFI solutions is a solid go to for most Holden electrical parts/connectors.

 

[Fu Manchu]

Handy skills:

 

[07GTS]

can u take a pic of the engine where it is ? map sensor has 3 wires as it needs a 5v reference, the 2 wire sensors are always intake air temp (if not in maf) or water temp, or alternator, or i think tank purge solenoid, but if u can get us a pic it will show us straight away

 

[Fu Manchu]

The coolant temp sensor.