shane_3800
Well-Known Member
- Joined
- Aug 13, 2011
- Messages
- 4,223
- Reaction score
- 1,799
- Points
- 113
- Age
- 35
- Location
- places
- Members Ride
- vr commo
I'm not interested in re-posts on something you've read, and I'll tell you why.
My experience with race engines and camshafts began in 1980 when building a 1345cc Mini engine running on methanol with a 45 DCOE Weber carby for junior speedway. The car won the state title in '81 and '82 until the driver moved to seniors.
Moving on to today, my race engines have won 4 Australian titles in production-based circuit racing, 16 state titles across 3 different categories and hold current lap records at Mallala, The Bend, Wanneroo WA, Sandown VIC, Winton VIC, Eastern Creek NSW, Bathurst NSW and Simmons Plains TAS.
As I've mentioned previously, I post about things I've experienced or opinions on that basis and like others who share their valuable experiences and opinions greater than something they've read about, perhaps you can do the same instead?
I don't want to get into a who's dick is bigger contest.
But do you grind cams?
Or do you order a cam grind?
Unless you actually grind the cam you don't setup the pressure angles.
A cam with .500" lift and a 20 thou 220° duration can have several different lobe designs, do you design lobes?
Pointing out race cars has not much to do with the lobe designs that cam manufactures use.
I assume you order a custom cam grind and the cam grinders deliver you a cam to those specs, yet you likely don't know the exact pressure angles they setup.
I mention Ben Strader as he works at EFI university, they test all of this engineering on a spintron, infact Ben Strader designed the laser measurement system for Spintron.
I'm not saying you don't know how to make a fast car, but there's about 50 times the engines builders in the US that are achievers like you.
I listen to many of them.
Like Keith Daugton, Darrin Morgan, Billy Godbold, Steve Morris ect.
These guys have built more race winning stuff than most.
Except Billy he's a cam guy.
But take Darrin Morgan for example, his step dad was a drag racer in the 50's and used to grind his own cams.
Then Darrin started at an engine shop when he was a teenager and has been doing it for over 50 years.
When these type of guys say something I listen as it's always correct.