Need Help! 91 Vn Running Rough!

[losh1971]

Yeah mate it’s just not turning over at all. All it does is engage the thermo fan

Try bridging the starter relay.

 

[Jimmee]

Alright I’ll have a go at that now. So Just take the relay out and bridge with a paper clip or something of that sort and it should start you reckon?

 

[losh1971]

Yeah or a piece of 6mm cable. Just touch it and see if it turns over or it won't stop if you jamb the ends right in.

 

[Jimmee]

Ok to easy cheers mate will have a go at it now

 

[MikeC]

Or swap it for another relay on the relay panel that you can test & know it works-like the horn relay.

 

[Jimmee]

I just switched one of the other relays over and still just doing the same thing

 

[losh1971]

Could be starter motor or ignition switch playing up. Or NSS if you have an auto.

 

[Jimmee]

Yeah I done it with the high beams which I know was working, but after I tried that and it did nothing I also tried just bridging it which also done the same thing....

 

[Jimmee]

it’s a manual. Yeah I suppose it could be something like that just pretty random, as I was already assuming there is some sort of short somewhere causing the car to run rough before it stopped all together

 

[Jimmee]

Would a starter motor on the way out cause the car to run bad on 2 cylinders haha? Or the ignition switch