Troyziee
Active Member
- Joined
- Sep 18, 2005
- Messages
- 769
- Reaction score
- 93
- Points
- 28
- Age
- 36
- Location
- Melbourne
- Members Ride
- MY17 SSV-R Sportwagon
g'dai guys. just after some help in the wiring of my system,
i've got a single 12" running off a two channel (bridged, running 800wRMS) unfortunatly, i've blown the subs voice coil (was second hand to start with) though ive been told i have to turn tha gain down, as the sub is only 550rms, single voice coil. though also wana no if the wiring into the sub i run is correct. its a dual lug terminal on the sub, so two pos two negs, im just running the wires to the outer pos n neg, is this correct?? cause i really dont wana blow another sub.
cheers
i've got a single 12" running off a two channel (bridged, running 800wRMS) unfortunatly, i've blown the subs voice coil (was second hand to start with) though ive been told i have to turn tha gain down, as the sub is only 550rms, single voice coil. though also wana no if the wiring into the sub i run is correct. its a dual lug terminal on the sub, so two pos two negs, im just running the wires to the outer pos n neg, is this correct?? cause i really dont wana blow another sub.
cheers