Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

painted VT dash fashia

totality

New Member
Joined
Jan 13, 2006
Messages
136
Reaction score
1
Points
0
Age
43
Location
Adelaide
Members Ride
VT Berlina wagon 5.0 litre
hey guys.
I went and painted my dash fashia today and thought id post pics up of how it looks.
i painted it gloss white to match with the colour of my car.

here are some pics of the fashia at the moment.
cheers

DSCF0778.jpg

DSCF0779.jpg


i will post pics of it in the car tomorrow when i reinstall it.
 

Christina

Banned
Joined
Jul 30, 2006
Messages
864
Reaction score
11
Points
0
Location
..
Members Ride
Almost genuine VT "S" + VZ "SS" Red Ute + Vk V8
hey i was just wondering i wanna paint mine, what sorta paint should i use? how can i go about doing this?
 

bassmansimon

New Member
Joined
Feb 8, 2006
Messages
198
Reaction score
1
Points
0
Age
39
Members Ride
VX S 5 speed
hey totality that looks great
post some pics of it in the car, and can you put a write-up on how to get it out? i don't want to break things.
 

ProphetVX

New Member
Joined
Mar 28, 2006
Messages
228
Reaction score
10
Points
0
Location
Cronulla, NSW
Members Ride
A Pushie
hey totality that looks great
post some pics of it in the car, and can you put a write-up on how to get it out? i don't want to break things.

There are 2 screws in the lower console (around transmission) on either side of the cigarette lighter (just take out the rubber mat). Pull that section towards your body it should unclip straight away very easily... the unclip your power windows controls from the loom.

To take out the upper section you should have another two screws holding it in... your dash cluster... unscrew, then unclip the upper fascia from around the cigarette lighter upwards slowly... it should all unclip easy. Then unclip all the controls from their looms.... then take out the controls themselves from the fascia....

I did it all without instructions it took about 5 minutes to do it, and its damn hard to damage it even if you don't know what you're doing
 

Ghost79

Thats How We Roll!!
Joined
Jun 23, 2006
Messages
88
Reaction score
0
Points
0
Location
Adelaide
Members Ride
95 S1 Berlina
Have you put ti back in yet?
 

mushroomboi

New Member
Joined
Jan 27, 2008
Messages
22
Reaction score
0
Points
0
Members Ride
VT 1998 Executive
So has ne1 posted pics? i want to see, how to remove and replace bulbs also..please
 

vxcalais_01

Well-Known Member
Joined
Jul 18, 2006
Messages
1,367
Reaction score
49
Points
48
Location
Melbourne
Members Ride
VX V6 Calais 3.8 2001
Sorry to change topic, but can someone tell me, on my dash it seems the section of water temp and the bottom lcd for kilometers per 100k(on RHS) are not lighting up. Is it just a matter of removing and replacing the globes at the rear ?
 

accentstencil

Well-Known Member
Joined
Jun 30, 2005
Messages
8,382
Reaction score
600
Points
113
Age
72
Location
Caboolture South, QLD
Members Ride
WH II Caprice, 5.7 2018 Equinox LTZ V
Sorry to change topic, but can someone tell me, on my dash it seems the section of water temp and the bottom lcd for kilometers per 100k(on RHS) are not lighting up. Is it just a matter of removing and replacing the globes at the rear ?

Yes, but you have to remove the dash surround to get at the cluster.
 

vxcalais_01

Well-Known Member
Joined
Jul 18, 2006
Messages
1,367
Reaction score
49
Points
48
Location
Melbourne
Members Ride
VX V6 Calais 3.8 2001
Is it just globes, or is it a matter of soldering led's etc.
 
Top