Post up you mace mods and power figure

[STL17]

Howdy all i thought it would be a good idea to put up a thread for people that run mace products and to show what gains they have seen from them ill start

Car- Vn ecotec v6

Trans- Auto stage 2 shift kit

Diff- 3.7 open wheel

Suspension- king superlows all round

Exaughst- catback lukey

Mods- * mace 1.98 rockers
* mace 12mm plen spacer
* mace 24mm main spacer
* mace 82c thermostat
* mace 69mm tb
* vt injectors
* l67 cold air intake

I got 129.3kw in 2nd cause my auto wouldent stay in 3rd on a mainline dyno with 298xxx on the motor
* tune by the1

 

[adz_vy]

VY L67

- ‘MACE’ A2A Intercooler adapter plate
- ‘MACE’ piping
- ‘MACE’ Intercooler system fitment kit
- FMIC 600x300
- ‘MACE’ ported LIM
- ‘MACE’ ported adapter plate
- 'MACE' ported supercharger
- ‘MACE’ 1.9 ratio rockers
- ‘MACE’ Larger throttle body
- ‘MACE’ Pulley and hub
- ‘MACE’ CAI
- 'MACE' 6mm Insulator

Power 206rwkw @ 12 PSI before porting blower, insulator and rebuilding auto

 

[MACE]

Jim's one

http://forums.justcommodores.com.au/mace-engineering/164956-513rwkw-v6.html

Hopefully it will be making even more once the motor is finished, which we've had a lot more input into this time round

 

[MACE]

Just had a though,

In regards to people posting up results it would be ideal if people could show before and after dyno results because comparing results from different dyno facilities can be somewhat miss-leading but please post away with a list of your mods and results achieved.

Cheers
Steve

 

[wildfireSV6]

CAR- ve SV6 3.6l Sidi

BOX-Manual

MACE
-manifold insulators
-OTR CAI
-Custom tune

OTHER
x force cat back
long extractors + 100cpsi cats
3.9 diff gears

Power 176RWKW before OTR, diff gears, extractors and cats

COMING
- CAMS!!!
- Ported intake

 

[MACE]

CAR- ve SV6 3.6l Sidi

BOX-Manual

MACE
-manifold insulators
-OTR CAI
-Custom tune

OTHER
x force cat back
long extractors + 100cpsi cats
3.9 diff gears

Power 176RWKW before OTR, diff gears, extractors and cats

COMING
- CAMS!!!
- Ported intake

Should be good to see what it all makes when it's done Mick

 

[adz_vy]

CAR- ve SV6 3.6l Sidi

BOX-Manual

MACE
-manifold insulators
-OTR CAI
-Custom tune

OTHER
x force cat back
long extractors + 100cpsi cats
3.9 diff gears

Power 176RWKW before OTR, diff gears, extractors and cats

COMING
- CAMS!!!
- Ported intake

Not too bad mate gotta be happy with that

 

[wildfireSV6]

Cheers adz, I'm pretty happy with we're it's at but theres always room for development and improvement wich keepts it fun!

Gotta be happy with ur charged 6. Sounds like its a weapon. I might think of going forced in the near future!

 

[adz_vy]

Cheers adz, I'm pretty happy with we're it's at but theres always room for development and improvement wich keepts it fun!

Gotta be happy with ur charged 6. Sounds like its a weapon. I might think of going forced in the near future!

HAHA yep but you know how it is we're always hungry for more and more power

 

[richardpalinkas]

car -
vz sv6

mods -
mace manifold spacers
raptor supercharger
catback exhaust twin 2 1/2
3.46 diff gears LSD

Power -
315RWHP (235RWKW), 872RWNm in 3rd gear

need extractors and high flow cats