Dayvo
Because i can
- Joined
- Apr 28, 2005
- Messages
- 2,669
- Reaction score
- 8,486
- Points
- 113
- Age
- 67
- Location
- South East,Victoria
- Members Ride
- VE SV6 Series 2
I installed a level 3 cluster which was supplied by another a JC member ( thanks 88Green VN top bloke ) and programmed to suit my VX ( thanks Phreddy , good guy ) .The problem is that i’m having trouble connecting the loom from the auto trans to the BCM . This is the sockets where they plug into but the problem i an having is that E7 already has a black / red wire connected to it . Has anyone else come across this problem because on one an any forum and thread i have read about it has had this problem . The “D” does light up on some occasions for a split second when i turn off the ignition .
PCM: cavity E6 = Auto Transmission PRND321 socket: cavity A
(Blue wire / White trace)
PCM: cavity E7 = Auto Transmission PRND321 socket: cavity D
(Yellow wire)
PCM: cavity E8 = Auto Transmission PRND321 socket: cavity B
(Grey wire)
PCM: cavity F15 = Auto Transmission PRND321 socket: cavity C
(White wire)
Thanks Dave
PCM: cavity E6 = Auto Transmission PRND321 socket: cavity A
(Blue wire / White trace)
PCM: cavity E7 = Auto Transmission PRND321 socket: cavity D
(Yellow wire)
PCM: cavity E8 = Auto Transmission PRND321 socket: cavity B
(Grey wire)
PCM: cavity F15 = Auto Transmission PRND321 socket: cavity C
(White wire)
Thanks Dave