Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

R31 Skyline .. Track/Weekend/Mountain/Drift Car.

sweefu

Active Member
Joined
Dec 1, 2008
Messages
2,742
Reaction score
6
Points
38
Location
Canberra
Members Ride
VY Berlina V6 / R31 Skyline
The fronts would be pokey with less camber :( (-3.4 degrees)
I'm doing wheel alignment and fitting up tyres tomorrow, I might take a little bit of camber out because it's chewing out my tyres too hard, I'll see how my 16x8 +2 fit with 205/50r16 and base the camber from fitting those.
 

sweefu

Active Member
Joined
Dec 1, 2008
Messages
2,742
Reaction score
6
Points
38
Location
Canberra
Members Ride
VY Berlina V6 / R31 Skyline
Changed over to VR Commodore calipers and QFM A1RM pads. I bedded them in but haven't had a chance to test them properly yet. I have all the fittings for my handbrake, just need to get into my friend's workshop to use his flaring tool. Then do radiator flush and new thermostat, and ready for Matsuri!


Is this ok? This is the way the calipers came so I just installed them the same.. Are the brake line and bleed nipple the right way? The fitting for the nipple seemed to taper down and fits well.. Can anyone check on their VR/VS for me? I would have thought the bleeder nipple should be on top (obviously) but this is how they were taken off the VR with the bleeder nipple on bottom?
2012-11-06161907.jpg


Also my tyre collection for Matsuri / IDA Day
2012-11-02161254.jpg


And a shot of the castor on the front :D
2012-11-05172410.jpg


Thanks guys!
 
Last edited:

Clint_G

Member
Joined
Oct 5, 2009
Messages
520
Reaction score
0
Points
16
Location
Townsville
Members Ride
05 VZ SS
the bleed nipple is on the top on mine. least its not a hard hing to change.
 

sweefu

Active Member
Joined
Dec 1, 2008
Messages
2,742
Reaction score
6
Points
38
Location
Canberra
Members Ride
VY Berlina V6 / R31 Skyline
Yeah I've only ever seen bleeder at top, obviously to bleed the air out. That's funny, I wonder how long the VR I took the calipers off had been driving around with the bleed nipple in the wrong place lol.
 

Clint_G

Member
Joined
Oct 5, 2009
Messages
520
Reaction score
0
Points
16
Location
Townsville
Members Ride
05 VZ SS
how did you go bleeding them. did you get a firm pedal.
 

sweefu

Active Member
Joined
Dec 1, 2008
Messages
2,742
Reaction score
6
Points
38
Location
Canberra
Members Ride
VY Berlina V6 / R31 Skyline
Yeah it feels like normal, but I only bled them quickly, enough to bed in the pads up to 80km/h around the block. I haven't been for a proper drive yet.
 

sweefu

Active Member
Joined
Dec 1, 2008
Messages
2,742
Reaction score
6
Points
38
Location
Canberra
Members Ride
VY Berlina V6 / R31 Skyline
Here is a compilation from Wakefield Drift Matsuri last weekend
 
Last edited by a moderator:

NickVR

Active Member
Joined
Jun 11, 2006
Messages
1,414
Reaction score
24
Points
38
Age
40
Location
Adelaide, SA
Members Ride
VR Executive A4 V8
So much lock on a 31. You running rack spacers and/or S13 lower control arms?
 

sweefu

Active Member
Joined
Dec 1, 2008
Messages
2,742
Reaction score
6
Points
38
Location
Canberra
Members Ride
VY Berlina V6 / R31 Skyline
Indeed, very good lock for stock! In the front I am running:

S13 LCA/Hub/Knuckle/Brakes
R31 Adjustable castor arms
N12 pulsar tie rods
S13 tie rod ends
HSD HR Coilover too

More lock than a stock S13 I'm led to believe.
 

Pub247

Well-Known Member
Joined
Apr 14, 2006
Messages
3,372
Reaction score
59
Points
48
Location
Melbourne S.E.
Members Ride
Ford Fairmont
lol poor steering wheel time for a new methinks
 
Top