VPRob
Well-Known Member
- Joined
- Feb 10, 2011
- Messages
- 1,120
- Reaction score
- 196
- Points
- 63
- Location
- nowra, NSW
- Members Ride
- VP executive sedan V6
Hi Folks, my VP has VT front brakes onboard and I am investigating dragging pads on the driver's side. I don't have a VT manual but my VP Gregorys says that if a slider pin is removed (say when replacing pads) the pin must be replaced because of the special thread sealer used on the threads. Does this hold for the VT? Does anyone do it?