Skaa
Member
Has anybody successfully removed the retaining nut from a rusted strut thread. My 1/2 inch rattle gun just spins the piston and iv already stripped the top tryna hold it with a 10mm socket the nut was pretty tight in rust but the retaining nut started moving which is a start. Strut has been sitting for a bit n got a bit of rain on it at some point. Need to get it apart n replace the top bearing. I’m thinking about grinding a few flats where it’s stripped n put a big shifter on it or buy some stilsons. sprayed some diesel penetrant at it, might be better to use the trusted wd40
Last edited: