Mattyboyy
New Member
- Joined
- Nov 26, 2019
- Messages
- 17
- Reaction score
- 0
- Points
- 1
- Age
- 26
- Location
- St marys
- Members Ride
- Vy spac
Hey all! I’ve just built my very first hsv, pretty exciting considering I’ve never done this before…
I had a vt calais as a donor car & pulled everything from it to bring the senator back to life, now when I try to turn the senator over… you guessed it, no start… it’ll beep 1 time to state I have bypassed the hsv ess system but it will crank twice & then cut power, every time I turn the key to fire it up it will do the same thing, 2 turns then cut out, I have used a pim from my donor however the bcm, ecu & keyhead are from the senator but from what I’ve been told if this was a linking issue it would not crank at all? At least one would thing… right? I have checked my earths as I re installed the harness when the motor was in the car & triple checked everything & can’t find anything to be loose
I had a vt calais as a donor car & pulled everything from it to bring the senator back to life, now when I try to turn the senator over… you guessed it, no start… it’ll beep 1 time to state I have bypassed the hsv ess system but it will crank twice & then cut power, every time I turn the key to fire it up it will do the same thing, 2 turns then cut out, I have used a pim from my donor however the bcm, ecu & keyhead are from the senator but from what I’ve been told if this was a linking issue it would not crank at all? At least one would thing… right? I have checked my earths as I re installed the harness when the motor was in the car & triple checked everything & can’t find anything to be loose