S.T.K.E
Wiggle Wiggle Wiggle
- Joined
- Mar 29, 2009
- Messages
- 345
- Reaction score
- 8
- Points
- 0
- Location
- Brisbane Northside
- Members Ride
- 2014 D22 Navara Dual Cab 4x4
Name: Callum
Location: Brisbane Northside
Ride: VT Series 2 Calais l67
Picked this fella up about 6 months ago for a mint. Had 90k on the clock for $12,000 from a dealer stock as a rock. It is in A1 condition.... the previous owner was the tax man thanks Q Fleet :thumbsup:
Mods:
So far have done
2.5" twin cat back system w/ rear resi..... puts out a very good note
Few interior mods, sound system (pulled from previous car), boost gauge, LED interior lights
Painted engine cover Chevy orange Removed
DIY Cold air intake (http://forums.justcommodores.com.au...e-1997-2002/18150-homemade-air-duct-pics.html)
Slotted and Drilled Front Disks
Bendix Pads
Top Gun Spark Leads 8.0mm TG MAX Series
Autolite 1 Sparkplugs 1.0mm gaped
Lurkey Air Filer
Future Mods:
Replace rear garnish with VX garnish, install monaro tail lights (have VX garnish getting painted ATM) (scratched)
Wheel wise, will probably through some 18's on there down the track some 20" (18's on now)
Drop it like it's hot (when get wheels)
10PSI pulley (DONE!)
If i win on a scratchy.... a front mount intercooler
Tell us what you guys think and i always love suggestions
Took pics when i detailed the car for C4C6
And the DYI CAI......... Wasn't to hard, can notice a difference also :thumbsup:
Location: Brisbane Northside
Ride: VT Series 2 Calais l67
Picked this fella up about 6 months ago for a mint. Had 90k on the clock for $12,000 from a dealer stock as a rock. It is in A1 condition.... the previous owner was the tax man thanks Q Fleet :thumbsup:
Mods:
So far have done
2.5" twin cat back system w/ rear resi..... puts out a very good note
Few interior mods, sound system (pulled from previous car), boost gauge, LED interior lights
Painted engine cover Chevy orange Removed
DIY Cold air intake (http://forums.justcommodores.com.au...e-1997-2002/18150-homemade-air-duct-pics.html)
Slotted and Drilled Front Disks
Bendix Pads
Top Gun Spark Leads 8.0mm TG MAX Series
Autolite 1 Sparkplugs 1.0mm gaped
Lurkey Air Filer
Future Mods:
Replace rear garnish with VX garnish, install monaro tail lights (have VX garnish getting painted ATM) (scratched)
Wheel wise, will probably through some 18's on there down the track some 20" (18's on now)
Drop it like it's hot (when get wheels)
10PSI pulley (DONE!)
If i win on a scratchy.... a front mount intercooler
Tell us what you guys think and i always love suggestions
Took pics when i detailed the car for C4C6
And the DYI CAI......... Wasn't to hard, can notice a difference also :thumbsup:
Last edited: