Scullboy19
New Member
- Joined
- Mar 16, 2022
- Messages
- 21
- Reaction score
- 0
- Points
- 1
- Age
- 21
- Location
- Sylvania
- Members Ride
- Vs ute series 1 5.0 hsv enhanced
Ok, so I have a 2000 vs ute with an l67 in it and a getrag manual. I’m planning on changing it to a t5 gearbox which I brought as a whole conversion but my problem is how do I do the wiring for it cause the t5 has completely different plug, my mate reckons using the wiring harness that came with the gearbox and just extend a few wires but then I’ve got the problem of the ecu because I’m assuming the ecu that’s already in it won’t just plug into the manual wiring harness. So with that I was thinking of just cutting the plug from the t5 wiring harness and rewiring the plug back onto the wiring harness that’s already in it. He tells me that it’s different and wouldn’t work that easily but I would just like to know whether or not that’s possible so I don’t have to **** around with that many wires and just have to figure out what wire goes where onto the plug that would match the t5 plug.
Any info would be much appreciated
Any info would be much appreciated