Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Trimatic to t700

kingswood country

Active Member
Joined
Sep 5, 2011
Messages
1,092
Reaction score
3
Points
38
Location
Melton
Members Ride
hj kingswood
I hope so. It's not that big, it's just square, it's bigger on the starter side, I might take the extractors out and have a look


Taking donations of cash, card or full frontal nudity.
 

kingswood country

Active Member
Joined
Sep 5, 2011
Messages
1,092
Reaction score
3
Points
38
Location
Melton
Members Ride
hj kingswood
Either way, it'd still have to be cut and stretched 19 mm to clear the adaptor.

So making one works out cheaper anyway when everything is free, and I've got nothing but time!
I'll throw up a picture when I get out there again to show the difference.

If it were that easy I would've just grabbed one from a vn-vt v8 auto.

Taking donations of cash, card or full frontal nudity.
 

kingswood country

Active Member
Joined
Sep 5, 2011
Messages
1,092
Reaction score
3
Points
38
Location
Melton
Members Ride
hj kingswood
I also want it to look good too.

And I can say, hey, I made that!


Taking donations of cash, card or full frontal nudity.
 

kingswood country

Active Member
Joined
Sep 5, 2011
Messages
1,092
Reaction score
3
Points
38
Location
Melton
Members Ride
hj kingswood
Thanks ari. Making one isn't really that hard. It'd be even easier if I had a mig!
And since its all free, I've saved a few bob doing it too


Taking donations of cash, card or full frontal nudity.
 

kingswood country

Active Member
Joined
Sep 5, 2011
Messages
1,092
Reaction score
3
Points
38
Location
Melton
Members Ride
hj kingswood
That looks fairly bulky,is there enough room for the exhaust ? .

I'm glad you mentioned this, cos no, the extractors don't fit with it, not on the drivers side anyway, starter side is fine, but had to revise the other side to fit around the pipes.


Taking donations of cash, card or full frontal nudity.
 

kingswood country

Active Member
Joined
Sep 5, 2011
Messages
1,092
Reaction score
3
Points
38
Location
Melton
Members Ride
hj kingswood
Inspection cover fixed, now to pull it apart and transfer it to steel
epy5uhe4.jpg
yzedary6.jpg
nice and tight, I you look closely, it's a squeeze between exhaust and flywheel, you can see the out line of the flywheel on the cardboard.
atunequ5.jpg
2yhe4eqe.jpg
Nd the finished template. It'll be cut down to 3 pieces, transferred, cut on steel and folded up, I'll trial fit the pieces and pop rivet angles to keep it together until it gets welded together.


Taking donations of cash, card or full frontal nudity.
 
Top