Twin Turbo VS Ecotec Build **engine build in progress page 16**

[Avi8or]

Hey mate long shot but you dont happen to have the CAD drawings for the manifold flanges still do you? Family member can CNC laser cut them for me if I can get some CAD drawings.

 

[IBLOWN]

Hey mate long shot but you dont happen to have the CAD drawings for the manifold flanges still do you? Family member can CNC laser cut them for me if I can get some CAD drawings.

Exhaust manifold flanges? Sure do $50 and their yours in .DXF format. Otherwise you can spend the 3 hours drawing it up lol.

 

[Pub247]

Exhaust manifold flanges? Sure do $50 and their yours in .DXF format. Otherwise you can spend the 3 hours drawing it up lol.

lol snap! they are a pain to draw takes ages to get them perfect, i also have a copy but its not for sale

 

[Blakvsexec]

you'll find them plates you are after on ebay for $55 a set

here
http://cgi.ebay.com.au/Holden-V6-3-..._Accessories&hash=item2a0e42e880#ht_500wt_922

 

[Pub247]

If your planning a turbo build 8 mm is too thin 12mm is what id recommend

 

[IBLOWN]

Yep 12mm then skim back to 10.

 

[soop]

What a complete waste of engery IBLOWN. Seriously, as if you'd bother.

Thats where its at.

 

[IBLOWN]

What a complete waste of engery IBLOWN. Seriously, as if you'd bother.

Thats where its at.

Hahaha, that little thing would put out more than your ''Non working SS''.

 

[soop]

Hahahahaha you're probably right too!

 

[delcowizzid]

tis a nasty little bugger that engine revs up fast with all the engine bearings being sealed ball bearings