jeffmills69
Member
- Joined
- Feb 10, 2017
- Messages
- 94
- Reaction score
- 8
- Points
- 8
- Location
- Melbourne
- Members Ride
- 2011 VE Wagon
Had a search on the forum already but figured I'd ask again,
I've replaced the rear sensors and it didn't fix the issue, scanned the ABS and no codes came up (might be the scanner I guess). I did recently change the front hubs but they're plugged in and appear fine.. Would it be possible to simply keep the new hubs on and just plug the old ones in, start the car and see if it sorts itself out?
If not, how do you actually check to see if the wires have come out of back of the plug on the rear sensors?
I've replaced the rear sensors and it didn't fix the issue, scanned the ABS and no codes came up (might be the scanner I guess). I did recently change the front hubs but they're plugged in and appear fine.. Would it be possible to simply keep the new hubs on and just plug the old ones in, start the car and see if it sorts itself out?
If not, how do you actually check to see if the wires have come out of back of the plug on the rear sensors?