Ripper_017
Member
- Joined
- Jul 21, 2011
- Messages
- 96
- Reaction score
- 5
- Points
- 8
- Location
- sydney
- Members Ride
- VF SSV REDLINE
so i began the endeavour of upgrading my front end from a 2015 SSV to a 2015 VF HSV clubsport front end . i purchased all the necessary parts only to remove my bumper and find the wiring loom connectors are different , there are 4 additional wires on the HSV loom which i was assuming is for the DRL lights to dim whilst the head lights are on .
i was at the cross roads of doing the snip and match the same colours on the loom which were in the same position , but i didn't want to go through all that to find it screwed up everything .
would anyone have any light to shed on this , I'm quite stuck as far as knowing what i should do , there shouldn't be much to change as it has the same amount of sensors , the fog lights are the same , it is just the DRL .
any help or info would be much appreciated - iv attached a pic of the hsv loom .
i was at the cross roads of doing the snip and match the same colours on the loom which were in the same position , but i didn't want to go through all that to find it screwed up everything .
would anyone have any light to shed on this , I'm quite stuck as far as knowing what i should do , there shouldn't be much to change as it has the same amount of sensors , the fog lights are the same , it is just the DRL .
any help or info would be much appreciated - iv attached a pic of the hsv loom .