guys quick question, i get the code 13 coming up and code 44 both flashing at 2.5 per second i think. anyways my problem with my vn series 2 has been when driving it it stalls, it is a manual but i thought it was my dad stuffing around, so started it up in the drive and sure enough with no one in the drive it stalls again. so i service the old girl including brand new ngkr plugs and topgun leads, changed my pod as well as i bought a k&n to replace my old saas one and just never put it on. so my dad takes it for a spin for about an hour (i get my license back in 5 days so i gots to be the passenger atm) everything is fine. then my bro comes to melbourne and again im sitting beside him and it stalls about 2kms away from home... i go under the bonnet with the car started and push the throttle all the way open whilst running and it was sitting on maybe 2 or 300 revs, it was barely moving!!! im at my wits end with it cause i changed my fuel tank over from the 60 to a now 80litre tank and it was a bit of a headf**k changing sender units over cause one was leaking everywhere. the 80litre tank has brand new hoses new hose clamps im running 2 fuel filters both brand spanking, the external is a brand spanker but the internal fuel pump is a little older lucky to have 1,000 kms on it, got changed about 6 weeks prior to me losing my license, i changed the filter/strainer on the internal pump now too. wtf is going on? will changing the oxygen sensor fix my problem or would it likely to be something else as well?