Madmatt
New Member
- Joined
- Nov 13, 2009
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Location
- New Zealand
- Members Ride
- VS Executive
When I turn on Aircon, all I get is a hiss behind dash and no cold air.
I understand that all vents and aircon use vacuum to operate, so yes, I know I have a vacuum leak!! However, the vent controls all operate normally (using vacuum), and the hiss (leak) only occurs when the aircon is turned on.
So my question(s) are;
Where is the best place to start looking? (Obviously behind the dash around the switch or is it on the temperature control unit?)
How do I get to it? (VS executive with aircon switch high up on dash by security light and hazard switch).
Any and all advice much appreciated. :beer chug:
I understand that all vents and aircon use vacuum to operate, so yes, I know I have a vacuum leak!! However, the vent controls all operate normally (using vacuum), and the hiss (leak) only occurs when the aircon is turned on.
So my question(s) are;
Where is the best place to start looking? (Obviously behind the dash around the switch or is it on the temperature control unit?)
How do I get to it? (VS executive with aircon switch high up on dash by security light and hazard switch).
Any and all advice much appreciated. :beer chug: