VS Berlina 1995 V6 4spd Auto...stalling issue!! :(

[daora]

Hi two days ago i got mi car back from the mechanics that suppolsvly fixed the stalling issue...now today while i was driving my family around the car stalls while im driving...i changed the harmonic balancer and teh crank angle sensor...changed the fuel pump and the filter what else could be wrong?!

 

[luv_mi_96_vs]

Could be the injectors I've just been having the same problem but looks like the filter fixed it, check for code errors

 

[daora]

Could be the injectors I've just been having the same problem but looks like the filter fixed it, check for code errors

Mate would have no idea how to check em i just get it serviced ,fill up petrol and drive

 

[luv_mi_96_vs]

There's a forum on here some where that tells you how to check the codes

 

[VS_Pete]

Here mate abit of reading but it is easy as you will be able to do it just read carefully.
https://forums.justcommodores.com.au/threads/checking-error-codes-vr-vs-revised.22307

Mate would have no idea how to check em i just get it serviced ,fill up petrol and drive

 

[daora]

Here mate abit of reading but it is easy as you will be able to do it just read carefully.
https://forums.justcommodores.com.au/threads/checking-error-codes-vr-vs-revised.22307

after reading the instructions it seems confusing

 

[Fenix_Longbow]

Easy mate - just need a paper clip, bend it out in the shape of a big U then put each end in #5 & #6, so basically side by side.

If you open you open your door and look under the steering wheel then follow to the bottom of the dash, the connector will be there.

As soon as that is done, turn your ignition on and watch the engine light flash.

Use that link to follow what code it spits out... Let us no how you go mate

 

[daora]

Easy mate - just need a paper clip, bend it out in the shape of a big U then put each end in #5 & #6, so basically side by side.

If you open you open your door and look under the steering wheel then follow to the bottom of the dash, the connector will be there.

As soon as that is done, turn your ignition on and watch the engine light flash.

Use that link to follow what code it spits out... Let us no how you go mate

im gonna take the car to aanother garage this week so far i spent $831 on repairs on this car

 

[VS_Pete]

Like Fenix_Longbow posted easy as you can do it mate..

Just remember it will flash 3 times.

1 flash/2 flashes = 12
1 flash/2 flashes = 12
1 flash/2 flashes = 12
error code is ok.

then it might go
1 flash/3 flashes = 13
1 flash/3 flashes = 13
1 flash/3 flashes = 13
so error code 13 may be your problem.

 

[VS_Pete]

Mate I was scared to do it then when I did I said to myself you girl you will be right mate.

after reading the instructions it seems confusing