Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VS seats into VK

Phantom VK

New Member
Joined
Sep 17, 2006
Messages
42
Reaction score
0
Points
0
Members Ride
VK Commodore
Does anyone know anything about putting VS seats into a VK? We have installed the drivers seat, but the passenger seat doesnt want to fit! The right hand side sits far lower than the left - any ideas on correcting it?
 

SL/ENUT

The SL/E Fanatic!
Joined
May 28, 2004
Messages
1,982
Reaction score
91
Points
48
Age
38
Location
Burnie, Tasmania
Members Ride
VB SL/E 5L
get 85 VK seat rails and bolt them onto the VS seat. It should then bolt into the VK.
 

Wrayza

New Member
Joined
Feb 3, 2006
Messages
105
Reaction score
2
Points
0
Age
33
Members Ride
VK Calais
Yeah the VK passenger seats are actually offset on their rails to the right, I have a passenger seat as my driver (purely because I had two leather interiors and the passenger seats were in better nick).

Anyway now when I drive the wheel is ever so slightly to the left of the seat. You get used to it haha
 

synoptica

Stripping VK - PM me!
Joined
Nov 22, 2004
Messages
354
Reaction score
8
Points
18
Age
37
Location
SE Suburbs, VIC
Members Ride
No longer a Commodore
Yeah the VK passenger seats are actually offset on their rails to the right, I have a passenger seat as my driver (purely because I had two leather interiors and the passenger seats were in better nick).

Anyway now when I drive the wheel is ever so slightly to the left of the seat. You get used to it haha
That'd be perfect for all the wogs that lean into the center of the car when they drive! :p

(seriously why do they do that?)
 

Phantom VK

New Member
Joined
Sep 17, 2006
Messages
42
Reaction score
0
Points
0
Members Ride
VK Commodore
get 85 VK seat rails and bolt them onto the VS seat. It should then bolt into the VK.
We had a drivers seat as the passenger seat, so went and got an old passenger seat - the rails are welded on, not boted on to the seat. How on earth do we make it work now?
 

SL/ENUT

The SL/E Fanatic!
Joined
May 28, 2004
Messages
1,982
Reaction score
91
Points
48
Age
38
Location
Burnie, Tasmania
Members Ride
VB SL/E 5L
Well find a VL drivers seat, unbolt that and bolt them to you VS seat. Hang on it might be alien bolts.
 

vkberlina

VK Madman
Joined
Mar 12, 2004
Messages
3,518
Reaction score
41
Points
48
Age
41
Location
NSW Central Coast
Website
www.members.westnet.com.au
Members Ride
VK EFI 5L, VK 134 Pack, LX8 Adventra, MF35 & MF50b
I have dont this its pretty easy actually but you need a couple of things.

Remove the 2 inner seat rails from the seats and throw them, use the outer rail from the passengers side and bolt it to the drivers side where the inner would go. Then get a pair of rails off a passengers side seat from a 85 model VK and bolt them to the passengers side seat. You use the VS lever on the VK rails no problems.

If your interested I have a pair of seat rails suitable for $30 plus postage.

cheers
Scott
 
Top