Quickly what screws do I use? Are sheet metal self tapper screws ok ?
tropz New Member Joined Oct 15, 2010 Messages 14 Reaction score 0 Points 0 Location Melb Members Ride VS Ute Nov 22, 2012 #11 Quickly what screws do I use? Are sheet metal self tapper screws ok ?
MADDNE33 Member Joined Oct 19, 2009 Messages 257 Reaction score 1 Points 18 Location Perth WA Members Ride 1999 vs ute series 3 Nov 22, 2012 #12 Are you sure your tucking the ss lip into the groove on the bumper?
VS 5.0 Well-Known Member Joined Jul 17, 2006 Messages 8,011 Reaction score 14,351 Points 113 Location Perth WA Members Ride VE SSV Z Series M6 Nov 22, 2012 #13 tropz said: Quickly what screws do I use? Are sheet metal self tapper screws ok ? Click to expand... Sorry can't help there. I used the screws that were on the wreck that I salvaged it off. IIRC they are self tappers.
tropz said: Quickly what screws do I use? Are sheet metal self tapper screws ok ? Click to expand... Sorry can't help there. I used the screws that were on the wreck that I salvaged it off. IIRC they are self tappers.
tropz New Member Joined Oct 15, 2010 Messages 14 Reaction score 0 Points 0 Location Melb Members Ride VS Ute Nov 24, 2012 #14 http://img708.imageshack.us/img708/9787/imageirt.jpg
tropz New Member Joined Oct 15, 2010 Messages 14 Reaction score 0 Points 0 Location Melb Members Ride VS Ute Nov 24, 2012 #15 My lip still doesn't sit perfectly, I'm going to have to wait for a hot day and try and stretch it that extra 20mm
My lip still doesn't sit perfectly, I'm going to have to wait for a hot day and try and stretch it that extra 20mm
VS 5.0 Well-Known Member Joined Jul 17, 2006 Messages 8,011 Reaction score 14,351 Points 113 Location Perth WA Members Ride VE SSV Z Series M6 Nov 24, 2012 #16 Here is where mine is screwed to the front bar (same on both side). How does yours look compared to this ? It was a pretty tight fit to get it on. Had a mate hold that bit in place while I screwed it on. Would have been too hard with only one pair of hands.
Here is where mine is screwed to the front bar (same on both side). How does yours look compared to this ? It was a pretty tight fit to get it on. Had a mate hold that bit in place while I screwed it on. Would have been too hard with only one pair of hands.