Harvs82
Active Member
- Joined
- Dec 29, 2005
- Messages
- 1,134
- Reaction score
- 24
- Points
- 38
- Age
- 42
- Location
- Glen Waverley VIC
- Members Ride
- MY08 Subaru Liberty GT-B & MY16 VF II SS Redline
yeah running some injector cleaner in it now, do occasionally put premium in.. spark plugs and an oil change are on the cards.. ive only had the car 3 months so unsure of state of these things
how do i go about resetting the plunger length, will have a look tomorrow is it pretty straight forward? will give it a clean
Also base idle.. where is this located? on/near throttle body.. still learning where things are and what all the sensors do
The plunger length can be adjusted by simple pushing the spring in a bit, until you get to 28mm, from the end of the plunger to the base of the spring from memory. It's located on the throttle body, on the opposite side to the throttle position sensor.
As far as I know, the base idle can't be adjusted via the ECU, but you can fiddle with the screw on the throttle body, I THINK. Maybe someone else can shed some light on this? What is the car actually idling at, in drive, and in neutral? It should be about 850rpm or so in neutral and about 750rpm in drive.