Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
what did you do to your car today?
- Thread starter ari666
- Start date
Tom_1569
Ecotech Power
- Joined
- Nov 19, 2006
- Messages
- 2,236
- Reaction score
- 52
- Points
- 48
- Location
- Gippsland - VIC
- Members Ride
- '14 SR5 Pusslux
Saturday on the 80:
Replaced CV's and rebuilt Swivel hub, new wheel bearings etc, all cleaned up, to pull it off the hoist and discover despite CV's being in bad condition, its a my air-locker that is ####ed
Now to pull it all down again and pull out the diff centre.
Replaced CV's and rebuilt Swivel hub, new wheel bearings etc, all cleaned up, to pull it off the hoist and discover despite CV's being in bad condition, its a my air-locker that is ####ed
Now to pull it all down again and pull out the diff centre.
Pollushon
Boost gives me a bar....
- Joined
- Nov 9, 2012
- Messages
- 3,750
- Reaction score
- 2,851
- Points
- 113
- Location
- Canberra
- Members Ride
- VY SS
Put some Nulon mineral 20w-50 in it. So far; impressive stuff for a few bucks.
Found some oil in the water, the LIM gaskets doth beckon, time to get some lifters and end the procrastination.
Found some oil in the water, the LIM gaskets doth beckon, time to get some lifters and end the procrastination.
Tasmaniak
Not a valid input....
- Joined
- Apr 30, 2005
- Messages
- 8,094
- Reaction score
- 131
- Points
- 63
- Age
- 41
- Location
- S.E. Melbourne
- Website
- www.ranjinstallations.com.au
- Members Ride
- VR Stato, C180 Kompressor, Prado and Ka
I personally am a MASSIVE fan of Nulon oils. All my vehicles run on it. Engine, trans, diffs, power steering and brakes.
peteVX6L
Donating Member
- Joined
- Mar 1, 2010
- Messages
- 36
- Reaction score
- 1
- Points
- 0
- Location
- Christchurch, New Zealand
- Members Ride
- VX Clubsport
I plasma cut the chassis strengthening off the last piece of my written off Clubby today (the driver side sill). Going to copy this one for the other side as that one is a little bent.
The bent side.
The bent side.
mpower
Well-Known Member
- Joined
- Jan 22, 2007
- Messages
- 5,078
- Reaction score
- 1,713
- Points
- 113
- Location
- Brisbane
- Members Ride
- V2 CV8 Monaro and VF SSV Redline
I plasma cut the chassis strengthening off the last piece of my written off Clubby today (the driver side sill). Going to copy this one for the other side as that one is a little bent.
The bent side.
[URL=http://s268.photobucket.com/user/petefj40/media/IMG_5543_zpsbd163cf6.jpg.html]
that'll buff right out
morphix
Member
- Joined
- Jan 3, 2011
- Messages
- 661
- Reaction score
- 0
- Points
- 16
- Location
- Cardiff, NSW
- Members Ride
- 2004 VZ SV6 5-Speed Auto
Got replacement steering wheel buttons off eBay.
The seller didn't mention the middle Next button has damage and was 'fixed' with silicon..
Also found out, that despite my current ones being backlit, and the 'replacement' ones having the exact same part numbers, etc there is no part number difference between backlit and non-backlit buttons... hmm..
Now to try and get a refund and try again.
The seller didn't mention the middle Next button has damage and was 'fixed' with silicon..
Also found out, that despite my current ones being backlit, and the 'replacement' ones having the exact same part numbers, etc there is no part number difference between backlit and non-backlit buttons... hmm..
Now to try and get a refund and try again.
morphix
Member
- Joined
- Jan 3, 2011
- Messages
- 661
- Reaction score
- 0
- Points
- 16
- Location
- Cardiff, NSW
- Members Ride
- 2004 VZ SV6 5-Speed Auto
Well the guy owned up to fixing them and giving a refund once he receives them back.
Now to hunt around for second hand ones again..
